M62 Cylinder head install

L322 sufferer · Oct 23, 2019

Good Afternoon All

Many thanks to Hippo for assisting in the right area to post!

Just joined the community and am seeking guidance on a particular item regarding the M62 cylinder head
Am ready to re-install but the manual states an O ring is required but am at a loss of locating the item through the spares network
Additionally have been informed there could also be a non return valve required?
Vehicle is a 2004 4.4 V8 Vogue
Appreciate any assistance/information in advance

Many Thanks

Saint.V8 · Oct 23, 2019

Which manual are you using?

Which O Ring does it state to replace?

There are O rings on the VANOS control solenoid housing and on the Cam Gear Chain Tensioner....

L322 sufferer · Oct 23, 2019

The LR workshop manual LRL0477 is shows a picture of the head with an O ring to be installed just back from the vanos inlet sprocket

Dopey · Oct 23, 2019

Whats the part number?

Saint.V8 · Oct 23, 2019

This One?

L322 sufferer · Oct 23, 2019

The manual does not give a part number it just says fir a new one!

Have asked British Car Parts and Rimmer Bros but they are at a loss as to the identification of the o ring

L322 sufferer · Oct 23, 2019

Thats the one but is says LH head - is that the LH in the diagram?

Saint.V8 · Oct 23, 2019

L322 sufferer said:
Thats the one but is says LH head - is that the LH in the diagram?

Yep, thats the LH Head....still trying to find the part number

Saint.V8 · Oct 23, 2019

6800 - Part Number LDO000020
HM1 - Part Number LZV000010

Are these they?

L322 sufferer · Oct 23, 2019

Evening Saint it looks like them but now appears like there is two items?

Is the 6397B a non return valve and the HM1 6800 the O ring?

Saint.V8 · Oct 23, 2019

6397B is a locating dowel....6800 is a non-return/check valve and HM1 is listed down as a spacer....but it could be called an O ring by the Land Rover manual and parts suppliers (and Land Rover themselves) may call it a spacer...

6397B is part number LYU000040

This is 6800....

And this is HM1.....

L322 sufferer · Oct 24, 2019

Morning Saint

Many thanks for your time and effort locating the required part very much appreciated

Additionally thanks to the members welcome messages also

Kind Regards

Saint.V8 · Oct 24, 2019

L322 sufferer said:
Morning Saint

Many thanks for your time and effort locating the required part very much appreciated

Additionally thanks to the members welcome messages also

Kind Regards

Hope it helps.

kg74 · Oct 25, 2019

It is the spacer shown in the last picture Saint posted. It is the exact same on the BMW engine - that is how I sourced mine. You can look the number up of realoem.com - just pick a 2001 X5 with 4.4. I believe this is the part #
11111739185

Henry_b · Oct 29, 2019

It's a spacer.

M62 Cylinder head install

L322 sufferer

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

L322 sufferer

Member

Dopey

Well-Known Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

L322 sufferer

Member

L322 sufferer

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Saint.V8

Dyed-in-the-wool 100% RR Junkie

L322 sufferer

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

L322 sufferer

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

kg74

Member

Henry_b

Think outside, no box required.

Similar threads