lt230 bearings

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
adrian hogg

adrian hogg

Well-Known Member
Posts
410
Location
WEST MIDLANDS
Does anyone have a list of bearing numbers for the LT230 transfer box. I am looking for the bearing manufacturers part numbers not the Land Rover numbers.
 
If you have a box already then the numbers will be on the bearings. You will have to strip it & sometimes they can be so faint as to be illegible. If that is the case then you could take the bearing to a bearing specialist company who should be able to identify a suitable bearing by measuring the old.
If not, you may have to ask someone like Ashcroft if they will let you have the manufacturer's bearing numbers.

Cheap rebuild kits aren't a good idea. The bearings might be fine but the seals probably won't be!
 
Ratae said:
If you have a box already then the numbers will be on the bearings. You will have to strip it & sometimes they can be so faint as to be illegible. If that is the case then you could take the bearing to a bearing specialist company who should be able to identify a suitable bearing by measuring the old.
If not, you may have to ask someone like Ashcroft if they will let you have the manufacturer's bearing numbers.

Cheap rebuild kits aren't a good idea. The bearings might be fine but the seals probably won't be!
Click to expand...
cheers i was hoping to get bearings from local supplier in advance of stripping the box
 
They MAY be able to cross reference the LR part numbers to Timken etc. Best bet is to go into a bearing specialist & ask.
 
Or just buy the bearing and seal kits straight from Ashcroft who'll supply high quality Timkin/GKN bearings and correct grade seals. There's a bloody reason I placed the Ashcroft link for the OP
 
Not me you have to convince....

Don't know whether the OP thinks that all kits will come with dodgy stuff or is thinking it will be cheaper to source all the bits separately from bearing stockists.
 
I used an Ashcroft kit some years ago to rebuild the transfer box in my 200TDI. I found the quality to be excellent and when I had a query I got friendly, professional advice.

Present main gearbox (LT77) needs an output shaft (worn splines), I'll go to Ashcroft again for peace of mind.

Regards
Paul
 
You must log in or register to reply here.

Similar threads

C
Lt77 and LT230 bearings
Replies
0
Views
179
chibabadave
C
Henry.adams
Lt230
Replies
11
Views
913
D1Nut
D1Nut
R
Transfer box
Replies
0
Views
759
Range Farmer
R
S
Lt230 1.310 ratio
Replies
3
Views
275
Sam Warder
S
dave evans
Transfer box
Replies
3
Views
567
dag019
dag019
Back
Top