P38A Low engine temperature 2.5D

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
He put them on mine, I don't know how many years ago now, and not had any problems with them, and they are still working fine, I did look on line but didn't have much luck
 
Sorted this issue lads. The previous owner of this beautiful girl should never be allowed near another Land Rover for as long as he lives! So many things have been bodged and the thermostat was no exception. It had been taken out and bent open with a screwdriver for some reason. So that's fixed now and the engine gets up to temperature as expected. Not much left on the list now!
 
Sorted this issue lads. The previous owner of this beautiful girl should never be allowed near another Land Rover for as long as he lives! So many things have been bodged and the thermostat was no exception. It had been taken out and bent open with a screwdriver for some reason. So that's fixed now and the engine gets up to temperature as expected. Not much left on the list now!
Make sure the viscous fan is good.
 
I might have been a bit rash and whilst the radiator was off to get to the thermostat, I might have taken the viscous fan out and conducted the air con fan mod. I'll find out if that works come spring time. I live in the North of Scotland and so I don't think it'll be an issue.
 
I couldn't find a way to get to the bolts without removing it. I tried loosening it and just pulling it forward an inch or two but I gave up in the end and just lifted it up. Not a big job really, in the end.
 
The securing bolts on the bottom were completely rusted in on mine and so it was more like 30 minutes but, as you say, better then causing accidental damage by trying to sneak in behind it in situ.
 
Back
Top