Loud thumping from flywhell area

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well now if you sit quietly I'll pour another pint, light me smoke and try to explain myself.

You see on the air intake hose there is a branch that takes the rocker cover breather hose. Suck slurp exhale. Now 'cos the breather. Slurp. Is connected to the air intake hose . Suck slurp exhale. Before the air filter. The oil mist gets carried into the filter. Slurp suck exhale. And blocks it, so what happens sis the yose gets rmoved. slurp. and drips oil on the floor . Slurp suck exhale. so what I thouhgt ide do is attatch theyose Slurp suck exhale. tothe TUbo side of the fliter. buy jove any one four anutther drink
 
arrr! i see said the blind man... now i had this on my masser wot i did was get a small k&n filter and stick it on the end of the pipe so it didn't go to the air cleaner. the filter was stop **** going down into the pipe. as i was chucking the standard air cleaner i didn't have to worry about the other end
 
Yeah but y'see I wanted to connect the breather to the air intake 'cos I think it would be neater and the oil mist would end up possibly helping to lubricate the turbo (probably not much and not necessary) and end up being burnt. Even if I put a filter on the end of the breather oil would still end up dripping out of it
 
whilst I'm here has anyone moved the rocker cover breather to the turbo side of the air filter, and if so where did you get the fittings????????[/quote]

This is not a wise idea With u thinking this i take it u get oil clogging filter!
If u put breather in b4 turbo and after filter you could cause over run problems as in when u switch off your engine could run on excess oil out of breather small chances i know but is possible and in long run not worth it!:confused: it easier too take breather pipe out and extend from rocker breather into either oil seperator tank or by simply putting extended pipe into chassis rail hole(also prolongs life of that side of chassis!!!!! good thing on landys!
 
Look lads bin reading your replys and, well. look its ,well, ah forget it, keep on tractoring, best oh luck,:)
 
You must log in or register to reply here.

Similar threads

A
Disco 1 LOUD CLICKING NOISE POSSIBLY FROM LT230
2
Replies
24
Views
4K
D1Nut
D1Nut
Maat
Disco 1 R380 output shaft wear question
Replies
2
Views
2K
michaelhands
M
S
P38A 2.5 DSE Ticking noise from engine
Replies
16
Views
4K
stopover
S
N
Freelander 1 Vibration in 'A' area, after clutch fitment.
Replies
3
Views
833
Nodge68
Nodge68
C
Disco 1 300TDI gearbox change/swap R380/LT230
Replies
1
Views
2K
Gazbo
Gazbo
Back
Top