Lost my Trafficators on my Defender

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
You don't say what age your Defender is, but I have a 1985 110 with glass fuses, and I have no end of problems with the fuses. They don't blow, they just have poor contacts and sulk every so often. On mine the brake lights are on the same fuse as the indicators, do your brake lights still work?
If yours has glass fuses I would suggest cleaning up the contacts on the fuse holder.
Hi Rougharse, mine is a 1990. I have taken all the fuses out to check that none of them had blown. Brake lights are working, only the trafficators have packed up. They only thing I haven't checked is the relay. Think I am going to have to buy one to check that out.
Many Thanks.
 
Mine have done exactly the same before. It's usually the hazard switch at fault. Either taking switch apart and giving the contacts a bend or change switch. I have several switches lying about and one gives you indicators but no hazards and one gives you hazards but no indicators. I currently have indicators but no hazards but the mot is coming up so I will have to do something about it.
+1 for the hazard switch
 
Lost both direction on my trafficators but still have the hazard lights. Checked all the fuses, all OK. All light bulbs are working.
The steering stalk switch is only about two years old, I reconnected the old one which other than the horn was in working order. Still no trafficators.
My electrician guy is away till the end of the month, anyone have any other ideas as to what I should check?

If the Hazards work then the relay is fine, it has to be Hazard switch, stalk or wiring before the hazard switch on the indicator circuits.

The harzard switch basically takes a permanent live supply combines the circuits and fires the supply via the relay for the flashing, on normal mode it takes the directional switching, and runs the split circuits.
 
If the Hazards work then the relay is fine, it has to be Hazard switch, stalk or wiring before the hazard switch on the indicator circuits.
The harzard switch basically takes a permanent live supply combines the circuits and fires the supply via the relay for the flashing, on normal mode it takes the directional switching, and runs the split circuits.

Hi, Thanks for the input. Someone mentioned on here that the trafficators were on a separate relay to the hazards. They said the relay for the trafficators was behind the speedo. Anyway I have ordered one so will see if that does the trick. Hazzard switch is only about a year old and not a Blue box one. I tried the old stalk which was replaced due to the horn switch not working. Trafficators still dead.
 
Last edited:
Back
Top