Lost key!

James_Marshall · Jul 7, 2021

Hi.
Just wondering if anyone has had any experience after loosing their ONLY key for the D2?
Ours has been dropped and now misplaced.. so we've not got any way of gaining access to the car...
Not got any fobs or anything with any numbers on...
Any ideas?
thanks.

Disco1BFG · Jul 7, 2021

Main dealer should be able to get you a key from their vehicle records - expect to have to prove you own the thing. They can probably get the remote too - but expect tears from your wallet.....

This lot might be worth a try anorl:-

http://mgroverkeys.co.uk/

no affiliation etc....

James_Marshall · Jul 7, 2021

thanks - ill try the link first and then go to the dealers...
I suppose I could try and get the key part from them, then a cheaper version online for the fob...?

sierrafery · Jul 7, 2021

Try to obtain the key code for the blade from a main dealer(while you pray that your's is still on the original setting) then you can get a keyfob from these guys https://remotekey.co.uk/land-rover-...overy-2-discovery-series-2-year-1999-to-2006/ who'll give you the EKA code too, get the key cut after the original LR code, remobilise it with EKA code then use the synking device for the fob

James_Marshall · Jul 7, 2021

(I have a nano com if necessary)

Thanks for the advice - but it seems they won't give you the EKA code until its been read by their reader, which you send back. And their reader will only work if the car is NOT immobilised,.... so I guess the dealer will have access to the EKA code?

sierrafery · Jul 7, 2021

Yes the dealer should be able to give you the original EKA code.

James_Marshall · Jul 7, 2021

The MG guys above couldn't help unfortunately. So i'll try the dealers. Thanks for your advices. Ill let you know how it goes

James_Marshall · Jul 7, 2021

Just one thing though, how who can cut the blade, once I get the code... will timpsons etc be able to do it?

Kenbo · Jul 7, 2021

My experience of Timpsons is that they will only cut their own supplied blades.
Try a good hardware shop or a locksmith.

discool · Jul 7, 2021

You will find the key number on the ‘security information’ ticket in your owners handbook, also on a sticky label on the wiring loom near the ignition switch which gives u the steering lock number which is the same. If you still have have them

Key cutting shops only cut a facsimile of an existing profile, they don't have records all the vehicle manufacturers key profiles to set up the cutting tool profile , but a main dealership does.

hoopfish · Jul 8, 2021

James_Marshall said:
Just one thing though, how who can cut the blade, once I get the code... will timpsons etc be able to do it?

Timpzons will only cut a key if you purchase it from them. I tried yesterday with some blanks for our LR3. Wanted £50 for a key. Any shop that has a laser lath can do it.

westone · Jul 8, 2021

I just went to an old fashioned locksmith like you get in most towns still, charged me £5.00 and perfect fit.

Andy Warren · Jul 10, 2021

Ditto above, timpson's wouldn't cut my blank either so I shall not be using them for anything again.

Lost key!

James_Marshall

Member

Disco1BFG

Well-Known Member

James_Marshall

Member

sierrafery

Well-Known Member

James_Marshall

Member

sierrafery

Well-Known Member

James_Marshall

Member

James_Marshall

Member

Kenbo

Active Member

discool

Well-Known Member

hoopfish

Well-Known Member

westone

Active Member

Andy Warren

Well-Known Member

Similar threads