looking for ECU reader

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

mal0r

New Member
Posts
10
Location
Stony Stratford, Bucks
Hi All,

After a 120 sovs bill for just resetting my freelander's check engine light so that I can start her up again, I'm looking to reset my own ecu error codes.

Does anyone know what interface box I need to plug it into my laptop? Y reg TD4 (that's the BMW one). I've seen some one eBay, but don't think I can use a OBDII compliant box.

Cheers
 
I guessed it was something like one of those fellas of of eBay that are both OBDII AND EODB compliant. I just don't know which one will tell me the score. As there isn't a plug in diag socket under the dashboard, I'm guessing it's in the electrical section on the top right of the engine bay. If it is, I can open it and see which pins are connected to the socket and tell which unit is compatible that way. Anyone want to put me straight?
 
mal0r said:
I guessed it was something like one of those fellas of of eBay that are both OBDII AND EODB compliant. I just don't know which one will tell me the score. As there isn't a plug in diag socket under the dashboard, I'm guessing it's in the electrical section on the top right of the engine bay. If it is, I can open it and see which pins are connected to the socket and tell which unit is compatible that way. Anyone want to put me straight?
Click to expand...
fink that after 2001 the obd11 protocol twas in use, dunt know what happened afore that, we got a few eggsperts on ere so maybe they can elp, there is an American company that do a software hook up via a lap top , bin tryin to find it for ya but no can find at the mo but that twas obd11 only,will keep lookin. . . .:)
 
Cheers fur looking. Somewhere I read it was EOBD compliant, but I haven't looked at where to plug the thing into yet, so I still don't know whare I would even plug the cable into!
 
Dont know the ECU reader thats needed for the Td4. But the port should be RHS of passenger footwell under centre console.

Try searching under BMW 3series and the Rover75 uses the Td4 engine as well. Some of the guys on MG-Rover.org might point you in the right direction:

MG ZT / Rover 75 - MG-Rover.org Forums


Let us know how you get on
 
mal0r said:
Thanks, port was where you suggested, in the passenger footwell.

Don't really want to pay 800 odd sovs when I've seen them for £35 on eBay!
Click to expand...
give rover ron er pm,he's got er lot of techo knowledge,un is very helpfull. . .this is er subject that could help all of us ,cludin tractor boys , yella might be able ter elp as well as e has er lot er know how, well sept fer motor colour[titter tee he] un catchin fast mutts. . . .:rolleyes:
 
mal0r said:
Thanks, port was where you suggested, in the passenger footwell.

Don't really want to pay 800 odd sovs when I've seen them for £35 on eBay!
Click to expand...


The £35 jobbies might just be fault code readers.
If you are going for full diagnostics/software and plan to keep the FL longterm then its a worthwhile investment
 
Rovacom lite is one of the two versions of diagnostic kit that Blackbox Solutions sell for LR use. The other one is Rovacom Pro.The other 2 most widely used aftermarket ones are Autologic and Auto Diagnos.
Not tried any of the e-bay ones,but I often get called to garages to read and reset codes where often high end diagnostic kit wont talk properly to LR,Rover and MG stuff.My kit is Testbook T1 and T4,by Omitech Ltd,until recently T4 was the official kit for LR and Rover/MG.It works properly with all the models with full manufacturers capability.
 
eightinavee said:
My kit is Testbook T1 and T4,by Omitech Ltd,until recently T4 was the official kit for LR and Rover/MG.It works properly with all the models with full manufacturers capability.
Click to expand...

Thanks for that comprehensive info Eightinavee!

Are Omitech the only suppliers of T4?

Any contact details and prices of this system?

Reason I ask is that I am avoiding my local dealer as they are bandits. As with all modern cars thats where the DIY mechanics stops at the ECU readings. Very few garages have the T4 diagnostics so it would great to have my own diagnostics, independent of a garage that is going to charge £75 an labour.
 
Have a look at the Omitech website,its just been updated - be ready for the prices tho,its not cheap !
 
Losin me marbles ! Use it all day,5 days a week and spell their name wrong.
Try Omitec : Home They have been very helpful,but like I said they are not cheap,low end - they have some very clever people there.
 
I use a SYkes Pickavant ACR4 and Rover V4 pod on my 75CDT.

This is the only one that is compatible with the diesels othe than Rovacom and Omitech.

They do a Landrover pod as well. You can often pick them up on Ebay.
The ACR2 will also work - it just has a 2line display so there's a bit more scrolling to do.

The Rover V4 covers all the Rovers petrol and diesel and also does the ABS and SRS on some.

The cheaper 'generic' code readers WILL NOT work on diesels pre 2005/6.
All they will do is display sensor data - rpm, boost pressure etc. They won't display or clear fault codes nor turn off the mil.

Ron
 
You must log in or register to reply here.

Similar threads

O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
594
oldradiotech
O
O
Help needed with 03 L322 DSC/ABS ECU coding data /BMW Toolset 32
Replies
0
Views
566
oldradiotech
O
Freddie17
Diagnostic reader advice
Replies
19
Views
2K
Freddie17
Freddie17
A
Help D3 Suspension
Replies
3
Views
503
Andrew bibby
A
rover75lover
l 322 air suspension problems
Replies
4
Views
1K
Datatek
Datatek
Back
Top