Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Looks like a Bosch VE. As lynall said before.
Lightweight S3 with Ford Banana Diesel - which Engine would you swop too?
- Thread starter bluebossa
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Great, thanks mate... makes since and I've just dug the invoice out and it was replaced by a Diesel specialist in 2004 and probably only done a few thousand miles since then... It does start on the button.
I've got some Engine Sound proofing arrived now so I'll get too quietening it down soon.
Overdrives have gone off the scale too - £800 now or more... maybe worth a Wanted ad here... is the forum on here good for Wanted ads?
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Thinking those are the same as the Security 6.00 x 16s on the Paddock website.
They are actually a bit cheaper from Paddock.
I have been considering them, but slightly deterred by then being tubed, so an extra tenner each tyre for the tubes.
Another thing I have been thinking about is the package deal from Paddock of 205R 16s on standard Series Rims, tubeless type, and not as wide as 7.50s, although wider than 6.00s.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
No harm in a Wanted ad on the forum, it costs nothing, see what pops up.
I had the 6.00 security on my s2, they looked really good, they also had sfa grip when it rained, you could drift the thing just with a dab of the throttle on every mini roundabout!
I found the biggest downside of 6.00 tyres is the lack of clearance under the diffs.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Chinese rubber maybe isn't the best in the rain!
The most off roading the Series does is rally fields, and NB picking up hay off the field.
I am really after the original appearance as much as anything else, the vehicle is fairly clean and tidy, and very original and standard, apart from the galv chassis and a few minor improvements.
The vehicles sell for silly money now, so although we aren't thinking of selling at the moment, I want to keep it looking as much like 1964 as possible.
Chinese rubber maybe isn't the best in the rain!
The most off roading the Series does is rally fields, and NB picking up hay off the field.
I am really after the original appearance as much as anything else, the vehicle is fairly clean and tidy, and very original and standard, apart from the galv chassis and a few minor improvements.
The vehicles sell for silly money now, so although we aren't thinking of selling at the moment, I want to keep it looking as much like 1964 as possible.
Iirc 7.50 were an option from new.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Could well be right. I can't remember, I was only One!
Could well be right. I can't remember, I was only One!
I was minus 5
I actually read to many parts manuals!
The two part numbers with the asterik next to them
Last edited:
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
The other option I had considered was Avon Rangemaster 7.50 16s on standard rims.I was minus 5
I actually read to many parts manuals!
The two part numbers with the asterik next to them
View attachment 269904
But when I look at old photos from the Sixties, most of the 88s pictured seem to have 6.00 16s.
Also, considering it is a ladies vehicle, it seems likely to me that the smaller footprint of the tyres will make the steering easier to turn at low speeds.
Considering how much hassle the 6.00s seem to be, though, I am going more towards the 205 option, they appear from the pics to be a straight 205, not a profile tyre, so reasonable on the ground clearance as well.
Gets us on to the tubeless rims as well.
https://www.paddockspares.com/205r1...on-16x5-5-tubeless-steel-rim-rrc503600pm.html
One of the weird things I noticed straight away when going from 6.00 to 7.50 was the brakes were not as good, I assume as the drum was rotating slower there was less friction taking place?
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Possibly a bit of that, but also that the bigger diameter wheel is more difficult to slow down, in the same way as it is more difficult to accelerate.
I was minus 5
I actually read to many parts manuals!
The two part numbers with the asterik next to them
View attachment 269904
Nice Picture thanks for that... I sold all my Excess wheels over the weekend, lovely chap drove from Durham to Wilmslow to collect the tall 7.50 Wheels, Tonka Toy ones also sold - priced em fairly chap on eBay...
The ones I bought and fitted Friday are 205 x 16 and yes standard profile they look much more in keeping with the Lightweight so a good swop in my mind.
Front 2 are Semperit Hi Grip, back 2 are Kingpin Remoulds
Wolf Pack
Active Member
- Posts
- 320
- Location
- Portsmouth
Are you happy doing your own engine work?
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Not wishing to knock your setup. I'm sure it is great. But I never really understood the Essex V6 swap. Heavier and less power than an RV8 and not a Rover engine... I guess if you had one to use for free/cheap. Then ok. And they can sound nice. But I'd have thought somewhat rare and an oddity to want to swap one in today in 2022.
- Posts
- 22,903
- Location
- In the next Glen
Not got to the end of the fred looks like a late 80s early 90s 2.5 Di engine.
- Posts
- 22,903
- Location
- In the next Glen
Similar threads
