coln18
New Member
- Posts
- 71
- Location
- Loch Lomond
After starting my 110 last night and switching on the lights with the light switch the side lights came on ok, but when i then proceeded to switch the full lights on nothing happened.
Today i tried changing both head lights with no success, i also checked the fuses under the drivers side seat and again everything looked ok.
my full beams still work when i pull back on the stalk, and when the switch for the lights are engaged the dash light goes out as well.
Any ideas guys...
P.S... I also have a squeeking noice when driving in the rain or damp, it disappears when its dry and if i turn the steering wheel even slightly it disappears too.
Could this be the swivel pin joints needing a one shot grease jobbie.....
thanks Colin
Today i tried changing both head lights with no success, i also checked the fuses under the drivers side seat and again everything looked ok.
my full beams still work when i pull back on the stalk, and when the switch for the lights are engaged the dash light goes out as well.
Any ideas guys...
P.S... I also have a squeeking noice when driving in the rain or damp, it disappears when its dry and if i turn the steering wheel even slightly it disappears too.
Could this be the swivel pin joints needing a one shot grease jobbie.....
thanks Colin