Light Bar wiring plug

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
No :) if it's 1 x 20 protecting the lot it might blow, and if its 2 x 20 the fuse exceeds the rating of the cable :D

The weakest link should always be the fuse not the wire

And I'm not certain but I'm sure there are issues with bunching of wires and where they pass through grommets etc where their current carrying capacity is reduced
 
Last edited:
I can highly recommend (as already mentioned) anderson powerpole connectors. they can be clipped together to make up connector blocks and you can't physically connect them wrongly once you make a matched set.
order in UK from Anderson Power Products Distributor, Battery, High Current Connectors, Golf Battery, Electric Golf Trolley, Wheelchair Battery | Torberry Connectors UK
Us radio hams use them for all our high-current needs!

The best part is that if you follow the convention that we all use, different bits of 12 v kit can be plugged together because any pair can connect to any other pair as long the red-black are the right way around.
- so you could e.g. temporarily unplug your lightbar and plug in a trailing lamp, for example, or power your lights from a 12v PSU...

RED / BLACK is the colour code for 12v in Powerpoles. EACH connector can be either 15, 30 or 45A -you need to specify what you want when you order.


more info here Anderson Power Pole Connectors
and here Powerpole Connectors

Good luck! Show us pics when you are done!

//Clive
aka g1wzm def 110
 
satchmolips said:
It is 17 amp rating and the draw will be 16.6. Is that not enough leeway??
Click to expand...

Not really.
When I said talk to MadHatMan it wasn't just because he's a pretty face. I think that you might find that this sort of thing is his business but he's very careful not to spam so I'll do it for him.
 
Don't forget that what ever earth method you choose it needs to have good continuity path back to the battery. Not sure if you are just planning to clamp the light bar on somehow but you still have 34 (ish) amps that need to get to ground / chassis. If you have less than perfect continuity you could end up with dim lights or cause 'hotspots' that may damage paintwork. Its all fine looking into how to get the power to the light but you still need to consider the same problems for the earthing aspect.
 
why not keep it simple? One live feed for each lamp with a 10amp spade fuse in an inline connector. Use a female spade connector and heatshrink to connect to the bulb. Earth each lamp via it's mounting bolt to the bar. Run an earf wire from one of the Lightbar's mounting bolts to a suitable earf point on the landies body or chassis. Wire each pair to a 30amp relay and install a 20amp fuse. between battery and relay.
 
redhand said:
why not keep it simple? One live feed for each lamp with a 10amp spade fuse in an inline connector. Use a female spade connector and heatshrink to connect to the bulb. Earth each lamp via it's mounting bolt to the bar. Run an earf wire from one of the Lightbar's mounting bolts to a suitable earf point on the landies body or chassis. Wire each pair to a 30amp relay and install a 20amp fuse. between battery and relay.
Click to expand...

Thanks Redhan but I thought I was! So..I do have each pair wired to a 30 amp relay, I do have a 20 amp fuse between battery and relay (but someone earlier said that was too high rating!). Then the point of dispute is I have from each relay one 17 amp wire to power two spotlights. This means I only then have two wires to route all the way up there. Are you saying take four wires all the way up? Or get some bloody great 20 amp rating wire?
 
satchmolips said:
Thanks Redhan but I thought I was! So..I do have each pair wired to a 30 amp relay, I do have a 20 amp fuse between battery and relay (but someone earlier said that was too high rating!). Then the point of dispute is I have from each relay one 17 amp wire to power two spotlights. This means I only then have two wires to route all the way up there. Are you saying take four wires all the way up? Or get some bloody great 20 amp rating wire?
Click to expand...

Get thinwall wiring, and run 4 up inside a length of heatshrink tubing It's what I've done and it's a neat job. Don't forget to run an earth wire in there, before ya shrink the tubing.

This way you only lose 1 lamp if a fuse blows. 2 x 30amp relays, 4 x 10amp inline spade fuses, 1 x 20amp fuse
 
SteNova said:
looks at the price :eek: looks how many meters its for :eek: looks at the price :jaw: comes back to this page
Click to expand...

I get mine from AutoVehicle wiring products usually. never looked at the price was just to show OP what he needs to buy. Who buys from Tweeks anyway Apart from dickhead chavs using mummies credit card to pay for it..
 
You must log in or register to reply here.

Similar threads

P
Wiring for Tow Bar
Replies
1
Views
165
Nodge68
Nodge68
D
LED front headlamps high beam on dip ??
Replies
18
Views
2K
miktdish
miktdish
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
853
sleepybear
S
G
P38 1995 Diesel in tank pump plug wire identification
Replies
7
Views
829
RangeRoller dt
RangeRoller dt
M
1985 90 Rear wiring
Replies
2
Views
1K
MelancholyDonkey
M
Back
Top