top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
Reinstalling a 20kw wind turbine using the 90 to lower and re raise it to and from the ground.
landy and wind turbine
- Thread starter top-cat
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
Erm yes?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
Piccies or it didn't happen 
top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
That'd blow me away if I didn't know you were full of hot air
top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
Bet that took a little head scratching
top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
not really, ive had severall weeks pondering and have seen them raised with 360 excavators before.
We usually ave A N Other erect the turbines and do the electrical installations our selves, but this wasnt one of ours.
The company who installed it didnt apply to connect to grid prior to installation and were refused export leaving the customer with a very expensive garden orninent that he could not use. They have since gone bust. This is the second of 3 we have been asked to commision and get grid connected that this company abandand using our load divert and power share pannels.
The turbine was erected 18 months ago using a neighbours field but was left in such a bad state after original instalation that access wouldnt be granted again, so we opted for the landy with winch which (just) fitted between the side of his property and a turfer as a back up.
Was fun using the land and very usefull for carrying all the kit up to the newly built plant room at the base of the turbine.
top-cat
Well-Known Member
- Posts
- 1,540
- Location
- Doncaster area
a few more piccys here https://www.facebook.com/tim.crook.9
Landyfox
Well-Known Member
- Posts
- 4,489
That looks pricy..?!
Good job matey.
Good job matey.
