Landrover discovery 5 not starting after a crash.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

chaplinvts

New Member
Posts
6
Hi guys can anyone help me with a problem i have on my crash damaged discovery 5 2018. The car wont start on the push button unless i bypass the battery terminals and connect to the front terminals via a jump pack. once started runs fine but comes up with "charging system fault". Ive checked the master fuse and most other fuses and relays and no joy. thanks in advance.
 
chaplinvts said:
Hi guys can anyone help me with a problem i have on my crash damaged discovery 5 2018. The car wont start on the push button unless i bypass the battery terminals and connect to the front terminals via a jump pack. once started runs fine but comes up with "charging system fault". Ive checked the master fuse and most other fuses and relays and no joy. thanks in advance.
Click to expand...

Needs codes reading ...
 
It has had the crash data reset and airbag light is now off. Also had a snap on code reader plugged in but never came up with anything related. That said the codes have been reset.
 
chaplinvts said:
It has had the crash data reset and airbag light is now off. Also had a snap on code reader plugged in but never came up with anything related. That said the codes have been reset.
Click to expand...

Shame, the PIDs should have been looked at to see what was happening ... unless it still shows data stream
 
There may be a fusible link which has been activated due to the impact. There should be a DTC set for it but it depends on how your code reader deals with DoIP
Charging system fault also indicates the BMS is not connected to both poles of the starter battery. Simple voltage & continuity tests are all that is required to identify the cause.
 
thanks, I might have to get someone out to diagnose it. I’ve tried everything I can do and I hate to say it but it’s beaten me. I’ve put new battery on, new master fuse, checked the fuses I can see with a multimeter including the relays and all good. It must be something to do with the crash, something has blown or needs resetting maybe 🤔
 
Just a thought - have you had both batteries tested? there should be a secondary one behind the RH side panel in the boot - possibly a capacitor depending upon build spec.
 
Noting your car was in an accident, Is there a mechanical spring-loaded inertia switch which trips on accident impact to cut power to engine systems such as the fuel pump? Such a switch has to be reset to restore normal operation of the car
 
Hi guys, I have only recently had the issue sorted. I can now Confirm after booking into a garage that it’s now fixed. They found a break in the main power lead from the battery which runs along the side of the driver side underside. Also they said the pyrotechnics fuse had blown. Strange because I changed it and still didn’t start 🤷‍♂️. The car now starts and charges the battery. Thanks for everyone’s input.
 
You must log in or register to reply here.

Similar threads

K
L322 not starting
Replies
11
Views
2K
backinblack
backinblack
O
Disco 3 (LR3) Air Conditioner on Discovery III TDV6 S 2006
Replies
9
Views
2K
ObjectiveGr
O
Blob
L322 (Not your usual) battery drain
Replies
7
Views
2K
Datatek
Datatek
markdfoster
1998 v8 Petrol & LPG 3.5Carbarettor,110 Defender Starting issue
Replies
18
Views
2K
Palagius
Palagius
H
P38A 1997 2.5 cranks dont start
Replies
6
Views
2K
Datatek
Datatek
Back
Top