Land Rover Jack
- Thread starter Ali3ta1r
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
As long as you are jacking under the axle then you only need to lift the wheel 1-inch to allow its removal so find your jacking point and measure the distance between the that and the ground.
Extended jacking is only required when you are lifting the chassis and the springs have to extend before the wheel lifts.
Extended jacking is only required when you are lifting the chassis and the springs have to extend before the wheel lifts.
The red two stage jacks go from closed height of 180mm to max height of 400mm.
Really good jacks.
Scooby22
Well-Known Member
- Posts
- 1,245
- Location
- County Durham
I have a land rover bottle jack in my battery box for emergency use and it will lift high enough to remove a wheel, but I use a 2 ton trolley jack for home maintenance
