Land rover defender L230 box refurbishment

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Lej

Lej

Active Member
Posts
160
Location
Devon
Hi guys,

Just looking for a reliable place to either buy or get my LT230 transfer box refurbished.

I currently have a 200tdi on a short bell-housing and I'm not sure if I'll have any problems matching up.
I'm looking for a better ratio for road use, so any recommendations are welcome.

Many thanks!
 
tottot said:
Many fit a Disco transfer box. Higher ratio in high gear but still the same in low box.
Click to expand...
I think mines a Disco box, as I've got a disco 200 TDI and axles already, it will happily sit at 75 on the M5.

How do I know which box is which?

Thank you!
 
This is the I.D on the box
 

Attachments

  • 20210517_134129.jpg
    20210517_134129.jpg
    381.6 KB · Views: 89
I’ve got a 1.4 ratio box just taken off my td5 if your interested send me a message! Will be a lot better than that 1.6! It’s in excellent condition but I’m in Hampshire!
 
jamesmartin said:
thats a 1.667 the lowest ratio suits a 2.5 na, a 1.4 would feel better which is the std defender box for tdi
Click to expand...

So I'm after a 1.4 ratio std defender transfer box? Will the output shaft be ok for a short bell housing. And lastly what would the I.D be for one of them?

Many thanks for your reply!
 
tottot said:
thats a 1.667 the lowest ratio suits a 2.5 na,

You must be revving the nuts off it at 75
Click to expand...
Boost pin + rings, Garrett turbo, full face intercooler.

The only thing revving it's nuts off is the transfer box, makes a horrendous noise lol
 
MaxyMan said:
I’ve got a 1.4 ratio box just taken off my td5 if your interested send me a message! Will be a lot better than that 1.6! It’s in excellent condition but I’m in Hampshire!
Click to expand...

Thank you for your consideration but unfortunately I'm all the way in Devon ☹️
 
Lej said:
Right I think I'm getting it

So I'm better off with a 22D = 1.410 (all 4Cyl 90/110 bar above)

How do I know what I.D relates to what ratio?
Click to expand...

Ratio
Typical Applications
12D
R 1.667
13D
R 1.410

14D
R 1.003
15D R

1.192


20D T 1.667
Defender 4 Cyl Non Tdi
22D
T 1.410
Defender 4 Cyl bar 2.5 Diesel Nat Asp.
25D
T 1.410
Defender 110 V8 With LT85 Gearbox
26D
T 1.003
RR Classic with 3 speed Chrysler Auto
27D
T 1.192
RR Classic up to 1985
28D
T 1.222
RR Classic 1986 0n & Disco 1
29D T
1.192
Defender 90 V8 with LT85 Gearbox
32D
T 1.222 4 Cyl & V8 3.5 fitted With LT77S Box
34D
T 1.410 Discovery V8 & 2.0 Mpi
36D
Q 1.211 Discovery
37D Q

Discovery

38D
Q
1.211
Defender V8 4.0
40D Q 1.211
Japan / South Africa
41D
T 1.211 Disco 2 With Diff Lock Stud
42D T 1.211

43D
1.410
Defender TD5
 
Perfect, thank you so much for your help. I think I'll put an order in with Winchester gears for a refurbished 22D T 1.410
Defender 4 Cyl bar 2.5Diesel Nat Asp.
 
Hi

Unsure where to post this and how to post it or find the right place so will start here until pointed in the right direction. I own a Land Rover 90 originally was a 200 then someone put a 300lump in then I purchased it. Been having loads of fun until the other day the engine mounts gave way. Not a big issue as we are going to take it out make new mounts because whoever did it before didn’t do them properly. We then noticed the bell housing bolts we are missing about 3 at the bottom but we can’t get any in as they don’t line up what or how do I fix this ? Is it a new gearbox etc to fit I’m a bit unsure. Thank you in advance
 
You must log in or register to reply here.

Similar threads

S
Lt230 1.310 ratio
Replies
3
Views
274
Sam Warder
S
R
Transfer box
Replies
0
Views
757
Range Farmer
R
J
TD5 defender Vibration
Replies
3
Views
477
chrisstdt
chrisstdt
T
looking to buy defender 110 advice please
Replies
2
Views
426
ttaattyy
T
P
Clutch Slave cylinder leak- 2015 Defender
Replies
2
Views
671
Defenders 110
D
Back
Top