Land Rover Defender 300Tdi Vacuum Pump for brake servo. Which part did you buy!!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Darwin70

Member
Posts
14
Hi thanks for reading this post. My original vacuum pump has stop working. I have take the hose off at the vacuum pump and there is little to no pressure or suck even revving the engine.
So as ever I googled for a replacement part/pump and on the net I saw lots of problems regarding the quality of the hardness of the pump cam follower with some damaging the cam.
Please could I ask which manufacturer did you buy and are still using now with no problems? and also out of interst did anyone fit an after mark 12v electric on and what pressure is?
Many thanks for your contribution and I look forward to your post.
Kind regards
Darwin
 
Thank you for your reply, I sorry I don't have alot of faith in Britpart stuff I hear some parts are ok and some from personal experience ie (exhaust rotting with in 1 1/2 years and a rear caliper busting the seals out of mating joints of the caliper in the middle of the Alps with in a week of fitting new calipers on the rear) I just want to hear what other owners are fitting and are they still working?......again thanks for your reply.
 
Thank you for your reply, I sorry I don't have alot of faith in Britpart stuff I hear some parts are ok and some from personal experience ie (exhaust rotting with in 1 1/2 years and a rear caliper busting the seals out of mating joints of the caliper in the middle of the Alps with in a week of fitting new calipers on the rear) I just want to hear what other owners are fitting and are they still working?......again thanks for your reply.
There's a UNIPUMP on eBay now for £90.
They seem to have been the OE supplier, so a bit better than £700.
 

Britpart gasket with a touch of thinned Blue Hylomar would be fine
 
Back
Top