bjornebraten
Active Member
- Posts
- 196
No sir. Now steering angle is 0.00 deg. on hawkeye. Hope stealer make it now. Old one didn`t communicate with diagnostics. Will open it to see if contacts are worn or??
L322 L322 td6 2004 sas calibration
- Thread starter bjornebraten
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bjornebraten
Active Member
- Posts
- 196
Got a date at stealer tomorrow. Hope he fix it.
browneyboy1
Member
- Posts
- 29
- Location
- Totternhoe
browneyboy1
Member
- Posts
- 29
- Location
- Totternhoe
Hiya lads
Changed the steering angle sensor and rear height sensors along with front near side!
just got 3 codes which keep coming up.
Steering angle sensor initialisation
canbus fault 32
air suspenion temporarily inactive
where do I go to next lads thanks kai
Changed the steering angle sensor and rear height sensors along with front near side!
just got 3 codes which keep coming up.
Steering angle sensor initialisation
canbus fault 32
air suspenion temporarily inactive
where do I go to next lads thanks kai
badfluffy
Well-Known Member
- Posts
- 2,132
- Location
- northampton
need to code steering angle sensor to car then turn from lock to lock
browneyboy1
Member
- Posts
- 29
- Location
- Totternhoe
tried to code steering angle sensor to car mate but autel box won’t let me until all fault codes are cleared, should I try different software or is it the same with all?
badfluffy
Well-Known Member
- Posts
- 2,132
- Location
- northampton
believe steering angle coding comes up under abs on autel as that's what i have access too
