L322 sagging overnight only when its on normal height
- Thread starter strt_strt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 6,165
- Location
- North Manchester
They are on separate pumps
Yes i know, that’s why it feels strange two pumps to have broken at the same time. When you pull the lever water comes out from both pumps the windscreen one and the headlights one, there is no pump noise whatsoever so it feels weird both pumps to be broken together.
- Posts
- 12,629
- Location
- Sud ouest France !
You could check to see if there is 12v at the plugs when you activate the screen wash button. That'll give you an indication of current or duff motors and then go from there.
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
I dont know on the l322 but the p38 headlight washer do not run every time you do the screen its after so many screen washes they will do one wash and if screen wash is low they will not work to save fluid for the main screen, so two stopping at once may be a red herring.
- Posts
- 6,165
- Location
- North Manchester
Same on the L322.
I think the connectors are the same on all the pumps so can be switched, 2 of mine were switched when I got it but can't remember which, maybe rear and headlights.
Don't see how water can come out though if pumps aren't working. Although it runs out of my headlight washers if I fill the water tank up too much.
Many people suggested the MF31-1000 battery.
I got the MF31-1000 battery, garage said it won’t fit as the battery terminal clamp is short (needs 4cm in length instead). I guess the battery’s terminals are different. I attach a picture with the old battery setup the distance from the two screws on the left to the terminal clamp is 3cm and they said is short for the MF31-1000. No idea what to do, do i need something like a terminal clamp extender?
I got the MF31-1000 battery, garage said it won’t fit as the battery terminal clamp is short (needs 4cm in length instead). I guess the battery’s terminals are different. I attach a picture with the old battery setup the distance from the two screws on the left to the terminal clamp is 3cm and they said is short for the MF31-1000. No idea what to do, do i need something like a terminal clamp extender?
Attachments
- Posts
- 6,165
- Location
- North Manchester
My terminals are different to yours (this is my old battery but they still fitted the MF31-1000).
Tanya do a 110 amp that you can get on e-bay with a 5 year warantee for around £140, I put one in my 2004 3.0 diesel vogue and it has been superb. I read in th eoriginal owners manual that 95 amp was fine but there was an asterix saying up to 110 required if *additional extras and equipment ordered.
Similar threads
Disco 3 (LR3)
Discovery 3 sagging overnight
