L322 Air Conditioning (I know I know)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Girthy

New Member
Posts
2
Good Afternoon all,
So probably a common issue but looked throught the threads for my particular issue and couldn't spot anything.
AC blowing warm and sometimes even hot air..... had it gassed and there's no leaks or loss of fluid.
What I have noticed though is that the compressor is turning all the time regardless of whether there is a demand for cool air or not.... I just wanted someone to validate my thoughts that the compressor (clutch) is well and truly Donald Ducked, before I shell out for a new one.
Many thanks in advance
Girthy...... oh sorry it's an L322 4.4 TDV8 2011.
 
Good Afternoon all,
So probably a common issue but looked throught the threads for my particular issue and couldn't spot anything.
AC blowing warm and sometimes even hot air..... had it gassed and there's no leaks or loss of fluid.
What I have noticed though is that the compressor is turning all the time regardless of whether there is a demand for cool air or not.... I just wanted someone to validate my thoughts that the compressor (clutch) is well and truly Donald Ducked, before I shell out for a new one.
Many thanks in advance
Girthy...... oh sorry it's an L322 4.4 TDV8 2011.
One for @Graculus it might be the version where the compressor does run all the time and is either variable vane or has a bypass valve.
 
It's the variable displacement type - it does have a clutch but that won't be the problem, you can either remove the compressor & install a new control valve (LR086045) or replace the compressor - it all depends upon if, and how much you pay for labour as to which repair is the best.

This is the compressor, the supplier is 'known good' - I've used them probably half a dozen times, the price is a bit higher than usual as it's 'aircon season'. https://www.ebay.co.uk/itm/134932703716

Most 'modern' (mid-1990's on) HVAC systems work on the reheat principle, that is, all air is chilled to remove moisture, then heated to the requested temperature. The percentage of engine power consumed is minimal, so you're unlikely to notice any mpg difference but would notice the amount of moisture trapped in the vehicle.
 
It's the variable displacement type - it does have a clutch but that won't be the problem, you can either remove the compressor & install a new control valve (LR086045) or replace the compressor - it all depends upon if, and how much you pay for labour as to which repair is the best.

This is the compressor, the supplier is 'known good' - I've used them probably half a dozen times, the price is a bit higher than usual as it's 'aircon season'. https://www.ebay.co.uk/itm/134932703716

Most 'modern' (mid-1990's on) HVAC systems work on the reheat principle, that is, all air is chilled to remove moisture, then heated to the requested temperature. The percentage of engine power consumed is minimal, so you're unlikely to notice any mpg difference but would notice the amount of moisture trapped in the vehicle.
Thanks @Graculus..... I'm fair at being hands on... I rebuilt an 88 series 3 a while back.... I know thats like comparing a timex to an apple watch.... but will have a dabble at replacing the compressor myself. thanks for the link by the way.
 
Back
Top