KV6 head to cam carrier gasket?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
My rear window is in the up position on the outside and when I pull in the door catch it doesn't drop to close the door properly, I tried using the button inside to lower it but it wont drop at all, you can hear the motor trying to move it, but its not doing anything, now when i shut the rear door the glass is on the outside and it is raining in........also another problem is my front window washer is not working, have checked the fuses and they are fine.....help ??
 
[email protected] said:
My rear window is in the up position on the outside and when I pull in the door catch it doesn't drop to close the door properly, I tried using the button inside to lower it but it wont drop at all, you can hear the motor trying to move it, but its not doing anything, now when i shut the rear door the glass is on the outside and it is raining in........also another problem is my front window washer is not working, have checked the fuses and they are fine.....help ??
Click to expand...

:welcome::welcome2:

Just a tip though, it's usually best to start a new thread if you have an unrelated question.

Also, I STRONGLY recommend you don't use your email address as a username - we get strange tratter drivers on here...
 
Last edited:
I have the same KV6 engine in my MG race car. I was also surprised to find the gasket a sheet of metal. Anyways. Just add a small amount of sealer around the cover and directly onto the engine. Your have no problems afterwards.
 
AshC said:
I have the same KV6 engine in my MG race car. I was also surprised to find the gasket a sheet of metal. Anyways. Just add a small amount of sealer around the cover and directly onto the engine. Your have no problems afterwards.
Click to expand...

What's your racer then?
 
bukko said:
:welcome::welcome2:

Just a tip though, it's usually best to start a new thread if you have an unrelated question.

Also, I STRONGLY recommend you don't use your email address as a username - we get strange tratter drivers on here...
Click to expand...

I can't figure out how to do that and also don't know how to change my user profile ! Can you advise me please ?
 
[email protected] said:
I can't figure out how to do that and also don't know how to change my user profile ! Can you advise me please ?
Click to expand...

To change your user name you'll have to private message accywingy.......here

May be worth marking it urgent as he's a busy chap

As for threads......at the top of each section of the forum there is a 'new thread' button. Worth using the search function on the top bar first though (not the google one.....the other one)

Hope that helps....

From a strange tratterer :p
 
Last edited:
You must log in or register to reply here.

Similar threads

xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
316
xDParis64
xDParis64
E
Freelander 1 Fitting new crankshaft rear oil seal and oil sump gasket to L series
Replies
1
Views
458
GrumpyGel
GrumpyGel
A
P38A Head Gasket Kit & ARP Bolts ?
2
Replies
23
Views
732
enjoi
enjoi
MonkeyLander
Fitting a Xtron Android unit, my experience.
Replies
3
Views
776
pwood999
pwood999
T
Water Pump / Cam Belt
Replies
3
Views
387
Telluride08
T
Back
Top