Landlover99
Active Member
- Posts
- 267
- Location
- Extreme North West
Just found a bunch of unexpected work on the motor, need to go and quietly sip a beer
- Thread starter defzilla
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
defzilla
Active Member
- Posts
- 175
Im actually doubting whats been said now, so Im getting a second opinion tomorrow, the rot is below the number plate area, on the inside of the cross member, approx 6 inches missing and the rest seems solid, so maybe this can be salvaged as Ive seen a lot worse on here that have been repaired to a good state.
Im thinking that they couldnt be bothered to do the work and wanted to offload it.
I will know more tomorrow.
Also the outrigger has x2 holes one on the door side, one on top, neither are more than an inch.
cowasaki
Well-Known Member
- Posts
- 1,517
- Location
- North West England
What area do you live in? That sounds like a large quote to me!
defzilla
Active Member
- Posts
- 175
I live in Lancashire
But, as I slowly figured out it doesnt need a new cross member or outrigger, I took it to a specialist today who is happy to weld it and says there is no need at all for replacements and that he has fixed much worse. So Im really pleased with that verdict.
:clap2:
But, as I slowly figured out it doesnt need a new cross member or outrigger, I took it to a specialist today who is happy to weld it and says there is no need at all for replacements and that he has fixed much worse. So Im really pleased with that verdict.
:clap2:
defzilla
Active Member
- Posts
- 175
Sure, heres a close up
Let me know if you need tips on what pressure to use, it makes a big difference, and cleaning your gun really thoroughly is a must
Similar threads
