Just Bought A Disco 1 300tdi Auto

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Big Stu 12 said:
He nearly did a few times......... but sat him down with cup of tea and a choc chip muffin for a re-think.....:D:D:D.

And then took over with my calm attitude before Matt got the chance to kick the hell out of it, :D:D:D:D:D


Come to think of it most of it has gone/going down the scrapy's anyway, lol
Click to expand...

Yup, I've got a jumbo sack of metal from just 2 days worth of cutting. Still got arch and sill on the other side to do :eek:

At the end of the day, once it is done it's done. That's the way I'm looking at it now. Won't ever be doing it again lol.

It's just annoying because I haven't got any other wheels after the van broke down permanently :doh:
 
A little bit of an update.... and I do mean a little bit :( Just come in as it is now raining again.

attachment.php


Got rear of the chassis welded in between the showers. You can see bumper brackets have been removed. It was rusting where the hole is drilled into the chassis to mount them on to. Brackets are gone for good :cool: And that can only mean one thing :eek: CUSTOM BUMPER :D :D :D (When everything else is done).

Plan is to get the rear crossmember in next. Then we'll be back to where I should have been before I found this rot :rolleyes:

Floor side panels and centre sections after that :blabla:
 

Attachments

  • IMG_0947.JPG
    IMG_0947.JPG
    80.6 KB · Views: 686
its getting there looks good sofar. All I can say is I must have been lucky with mine as it is still fair solid. only has to cut out rear arches.
 
:D:D little steps mate.... but they all forward now :D:D.

I'l catch up with you tomorrow morning to give you a hand, what time shall I pop round.?

The painted chasis looking good..... do you want me to cut the rest of the floor out so you can paint it all ;);););););):p:p:p:p
 
Nearly there.

25097d1314722073-essex-lanes-img_0953.jpg


Got to make up a few new boot cross members and get them into position hopefully tomorrow then get all underneath seam sealed... then once dry, apply paint in copious amounts!!! YEY!

Can then get fuel tank back in and spin it round ready to start on the rear drivers side arch :)
 
hi mate u did the rear panel was it a complete repair panel from a supplier like britpart or etc or did u bend and make one ?? mine passager side rear arch wheel is completed rusted. I have deceided I am gonna keep mine and repair all rusts with welding or body filler and rub the paint down and do a quick respray but I might take the body off and roll the chassis into my garage and get the chassis galavaized and repair all the rustsof the body etc what u reakon?
 
looking at your jobs i has my boot floor done and sills done etc but the surround area of the boots floor has rusted now by the arch I didn't know there was a panel for that area mm I might do the same
 
The panels were all from Land Rover. Britpart do sell them but I got a decent price for Land Rover so snapped them up.

Good luck with the chassis. My new chassis is due delivery on Monday morning in a nice pretty galvanised finish :D
 
As you will all know, I've now got a galvansied chassis to put onto this disco. It is being changed over this weekend!! :D

Then I'll be able to get back to finishing the other bits on the body and then get all the interior re-fitted - thank god :)

Cleaned up the old shock mount brackets in my huge electric tank, as well as zorst hangers and other little bits and bobs, then got them in primer and a bit of black paint.
 

Attachments

  • IMG_1088.JPG
    IMG_1088.JPG
    58.5 KB · Views: 195
  • IMG_1089.JPG
    IMG_1089.JPG
    85.4 KB · Views: 208
The chassis was changed over the weekend just gone. See here http://www.landyzone.co.uk/lz/f8/changing-my-chassis-yey-162576.html for the full story.

Now that's out of the way, I've got this lovely list to be getting on with........

Fit my new set of BFGs on modular wheels.
Weld last part of inner rear quarter panel.
Weld in boot floor lip.
Paint all round rear end.
Replace A frame joint.
Final fit rear brake line.
Fit boot floor cross members.
Rivet boot floor in.
Fit drop brackets for front brake lines (to make +2").
Replace and tighten all body mount bolts with m10 bolts.
Sort coolant mix for winter.
Refit interior.
Refit rear sets and dog guard.
Refit snorkel and breather pipes.
Finish making, paint and fit rear bumper.
Finish making tree sliders.
Make tank guard, paint and fit.
Replace centre box with straight through section.
Fit new speakers front and rear.
 
You must log in or register to reply here.

Similar threads

Padda.116
300TDI Disco1, temp sensor locations
Replies
9
Views
605
resto_d1
R
G
Anti Roll Bar disconnect
Replies
16
Views
456
Gingerbread
G
R
63 reg Disco TDV6 268bhp auto commercial, battery light on
Replies
10
Views
349
roythebus
R
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
632
Padda.116
Padda.116
Padda.116
D1 300tdi Heater cutting out!
Replies
4
Views
186
discool
discool
Back
Top