Jerry can holder behind rear wheel on a 110

overdrawn · Mar 3, 2015

I can't get the right Google terms, so I've come to the experts.

I want to install a jerrycan holder in the space behind the rear wheel on my 110. It's just for a water can. I'm sure there must be a ready-made product for this; could someone help by pointing me in the right direction?

Thanks

blue beasty · Mar 3, 2015

Do you mean like a Series spare wheel insert cut into the wheel arch inside?

overdrawn · Mar 3, 2015

Sounds about right.

tacr2man · Mar 3, 2015

the series spare wheel carrier goes into wheel box infront of rear axle. There are also jerry can size external opening boxes that can be fitted into side panels but also in front of rear axle. You might be able to fit a single jerrycan internally in the small compartment with lid that is behind the n/s rear wheel , by modifying the lid and cutout . HTSH

overdrawn · Mar 4, 2015

tacr2man said:
the series spare wheel carrier goes into wheel box infront of rear axle. There are also jerry can size external opening boxes that can be fitted into side panels but also in front of rear axle. You might be able to fit a single jerrycan internally in the small compartment with lid that is behind the n/s rear wheel , by modifying the lid and cutout . HTSH

That's my problem, there are loads of options in front of the wheel (if you don't have a passenger door), but I don't have a compartment behind the wheel. There is a void under the floor behind the panel, but no compartment, lid or cutout.

Motomaniac · Mar 4, 2015

Do you mean one of these?

overdrawn · Mar 4, 2015

Motomaniac said:
Do you mean one of these?

Yep, that's the badger.

Thanks!

Jerry can holder behind rear wheel on a 110

overdrawn

Member

blue beasty

Leaks an prone to bits dropping off

overdrawn

Member

tacr2man

Well-Known Member

overdrawn

Member

Motomaniac

Member

overdrawn

Member

Similar threads