ZDomZ
New Member
- Posts
- 1,723
- Location
- South Norfolk
Graphite will look great. How does it handle and have you fried them out off road yet?
Jeep wheels
- Thread starter RO51
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Only just put the tyres on. Wheels went on in December and I ran around on the original 225/60/18 road tyres until they died. It's a bit of a mission to make the 255s clear every thing. Lots of trimming and beating! And still more to go
Briggsy1980
Member
- Posts
- 71
- Location
- Cheshire
tonytherunner
Active Member
- Posts
- 339
- Location
- wherever the road takes me
I intend to buy jeep wheels with BF Goodrich tires at 235/70 / r16, fit or not ???
Wheels are 5x114.3 7j I know that different central hole.
....thanks
Wheels are 5x114.3 7j I know that different central hole.
....thanks
thizzlemania91
Active Member
- Posts
- 241
Diesel what spec are the 16 steelies you had previously? Thanks
tonytherunner
Active Member
- Posts
- 339
- Location
- wherever the road takes me
I intend to buy jeep wheels with BF Goodrich tires at 235/70 / r16, fit or not ???
Wheels are 5x114.3 7j I know that different central hole.
....thanks
So nobody knows if fit
??? ..... could sell them in time
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
I'm guessing mine were jeep just sold as freelander ones. Le large spigot hole was never an issue. The bolts centralised them. Most modulars aren't hubcentric on landies. I've got some spigot rings in my new alloys but ran around for ages without them with no probs.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Freebie spigot is 64.1mm jeep is 71.6mm assuming you get the correct ones bolt patterns are the same at 114.5 which just happens to be 4.5" so it makes sense for yanks to use it!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
The offset is about right to not need spacers. ie. they stick out about an inch compared to standard
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Look at jc600s thread as he bought mine off me
The Docmeister
Active Member
- Posts
- 121
- Location
- South Lanarkshire
I intend to buy jeep wheels with BF Goodrich tires at 235/70 / r16, fit or not ???
Wheels are 5x114.3 7j I know that different central hole.
....thanks
They should fit OK since the offset is greater on the Jeep wheels - they'll just stick out a bit further. Simply need to check they don't foul the wheelarch plastics I'd reckon, suspension/ steering clearance should be no problem.
I'm running 235/70 16s Michelin 4x4s on Freelander alloys, no problems with rubbing anywhere.
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
It fits. Just!
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Been busy trying to build business up, also had no money
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
- Posts
- 83,282
- Location
- Embasinga stocæ
mite have to watch the door hinges
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Thought they only fell off in water?
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Similar threads
