James Mac's Defender 90 Rebuild

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Great looking project James, good call on getting the axles shot blasted, I spent ages stripping mine and they weren't that clean, May look tatty in a couple of years. Nice colour on the bulkhead too.
 
Discokids said:
Great looking project James, good call on getting the axles shot blasted, I spent ages stripping mine and they weren't that clean, May look tatty in a couple of years. Nice colour on the bulkhead too.
Click to expand...


Thanks mate.
Shot blasting is the way to do it, I spent hours with the grinder and didn't even do 1/4 of the casing!! I wish I'd got the axle cases galved now aswel but that seemed a bit over the top at the time :)
I can't wait to paint the rest but it's going to be a while.
 
James_mac said:
I bet you are, you always seem to have a project on the go!

Iv almost done as much as I can now before I need to start to striping my 90 down. And I can't start that as I'm moving with work and not going to have a workshop for a while. So I'm going to have to mothball it until I find somewhere to continue with the rebuild.

Or I could bring it around to you and you could finish it for me :-D it'll only take you a weekend :) lol
Click to expand...

:lol: maybe so :eek:
It's what keeps me sane, gotta be better than being sat on my arse all weekend.
I've been looking on and off for another for a while now, can I find anything? Can I chuff :frown:
Everything is either miles away or they want a bloody fortune for a rusty old shed, prices seem to have gone silly.
So I'm just doing a few bits I have laying about to keep me busy more than anything else.

Oh and the paint is looking good :)
It's always a shock to me when I first put a colour on and I think, what have I done! :eek:
But they usually die down a little anyhow.
 
Quick question, I fitted the clutch and everything the other day and the rod that goes into the slave cylinder has about an inch of movement in it, is this normal, I don't have a slave cylinder to attach yet so just thought I'd check as If it is wrong now would be the time to fix it.

 
Hmmmm. That doesn't sound right. It sounds as though the clip on the clutch release arm isn't holding it properly. That being said mine is a V8 so maybe different?
 
That's fine as it is, the slave cylinder is concave inside so it will sit in the middle once it's together, and there's no other part that goes there. As far as I'm told, the clip securing the rod to the arm is only to stop you losing the rod inside the bell housing.
 
I got the bulkhead fitted today, sort of, I need some longer bolts to connect it to the chassis and need to attach the brackets but the paint is still drying on them, I should get it fitted properly mid week :)









I'm so glad Iv got a engine lift to use, Iv relied on it throughout the build as I'm doing it on my own.
I'm quite liking the colour now too, these pics should show it better.
 
I like your colour, and ignore what I said about the rod, I assumed you meant side to side! I've no play in and out (ooh-err) so you should look into that.
 
I can't bear 6 minutes and 54 seconds of his voice, pity he doesn't go into more detail about the rod. I guess as long as it's secured there shouldn't be a problem.
 
I fitted the bulkhead brackets.


Then I fitted the recon steering box and connected everything up. Need to get myself some bigger sockets as I didn't have one to fit drop arm nut.




 
Awesome build, how long has it taken you to get to this stage and how many hours a week do you get to work on it? Having just started taking mine apart to rebuild I can't wait to get to this stage.
 
You must log in or register to reply here.

Similar threads

W
Heater rebuild and motor lubrication.
Replies
0
Views
174
Wolf Pack
W
B
bulkhead
Replies
7
Views
558
Dauphproto
D
N
130 rebuild, nuts and bolts up
Replies
1
Views
648
miktdish
miktdish
M
1992 200tdi 90 2.5 Body Parts Catalogue
Replies
5
Views
482
Mepps
M
B
rear axle
Replies
0
Views
212
bosun
B
Back
Top