Jai’s support/Camping Trailer project

Not a lot has happened on this recently.

Managed to panel in the front section, need more steel, and plenty of welding up supports and protective bars/tub supports to be done.

Because the roof will and has tried to move apart a ratchet strap to get it back to where it should be.

Need to cut the old roof gutter to angle the sides to match the angle of the side panels.

It may look odd when the front roof panel fits back on with the bottom now wider than before by circa 70-80mm however there is plenty of gutter so the panel can sit central but the bottom of the gutter will not be parallel as it wouldn’t be with the roof panel.

Still not wholly convinced but it’s a start to filling a hole especially as peterborough is coming up.

Nice, I think this will come out bob on

What is the weight difference between a narrow and wide track sankey? I know the wide is about 750kg

Wide track 509kgs empty
Loaded MAM 1190kgs

Narrow track 373kgs empty
Loaded 1000Kgs

But I’ve seen 1100kgs loaded mentioned too