I've just bought a 101 Ambulance... (YAY ME!)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yfo866

yfo866

Well-Known Member
Full Member
Posts
1,088
Location
Worcestershire
So far i've driven it around a field scaring the resident sheep and then once around the block after slackening off the brakes as they are binding on, quite a bit... Genuininely worried i might not be able to get it back home again!
So a total brake overhaul is next on the list of jobs.
At the same time does anyone know where i might find out where to procure a key blank/ new lock for the back door? It came to me without any door keys. I've fitted a new pair of front door locks and managed to get a key blank after about eight trips down to Morrisons to see the man in Timpsons. It isn't the right one as it's too long but it does slide into the lock ok. The very nice helpful man in Timpsons shortened it for me.
Does anyone know who the coachbuilder was who built the ambulance bodies? Or what TD26 might mean, as seen on the barrel face?
 

Attachments

  • back door lock.jpg
    back door lock.jpg
    194.2 KB · Views: 138
KISSMYAURA said:
nukey.co.uk

TD 26 - Nukey

TD26 Yale keys for office furniture
nukey.co.uk nukey.co.uk

google is yr friend yale td26 simples
Click to expand...
Thanks for pointing out the obvious!
I only read it as '26' when i took that last picture to show the guy at Timpsons. Before then it read td2?
I'd tried searching for Yale td2 and td0 or tdg because that's what it looked like, if it wasn't just a scratch.
I hadn't thought to search for td26. In the last pic i must have just caught it in the right light.
So seriously, thanks :)

Previous pic below
IMG_20231010_163313.jpg
 
Shippers said:
Just remembered was probably Marshells...
Click to expand...
Took better pics of the data plates in the cab and noticed one of them listed the manufacturer as MCE Limited. I googled them last night and found an MCE Limited listed online but it says they were established in 1996 so probably aren't the ones who built ambulances, but i sent them an email last night anyway.
I'm going to get a certificate from Gaydon to establish the date of manufacture as the V5C states the date as 1982 which might explain (if correct) as to why the box for the MOD reg number is blank.
 
Wolf Pack said:
Maybe try PA Blanchard as well.
Click to expand...
If i can't find a parts and workshop manual at the next Malvern spares event or Stoneleigh next month i'll be calling on them as they keep in stock several different 101 manuals. There was nothing at yesterday's militaria day at Malvern
 
Wildefalcon said:
Manuals are available on line, covering the GS.

.
Click to expand...
Thank you for that! Because i've never come across a 101 manual online in previous Land Rover searches it didn't occur to me to search for one.
Downloaded!
But i'm old fashioned and still like to have paper in my hands so i'll be scouring Malvern AGAIN this Sunday for any 101 manual in print.


LOTS of manuals for various Landy here:

 
Last edited:
yfo866 said:
Thank you for that! Because i've never come across a 101 manual online in previous Land Rover searches it didn't occur to me to search for one.
Downloaded!
But i'm old fashioned and still like to have paper in my hands so i'll be scouring Malvern AGAIN this Sunday for any 101 manual in print.


LOTS of manuals for various Landy here:

Click to expand...
I get that, but I find the ability to search a .PDF document very useful (assuming the image quality is good enough to OCR it) & then print off pages/sections as needed. YMMV
 
Shippers said:
101 parts will you this new for 32 quid thay also have operaters manual..View attachment 300853
Click to expand...
I've already had a look at their stock. Compiled a long list of parts that i'd like. Currently trying to decide on whether to buy new plastic brake/clutch fluid reservoirs or opt for their ally ones.
I should be picking up a full set of brakes shoes and rear wheel cylinders after work on Saturday. If all goes well i might be driving it to Malvern on Sunday 🤞
What fuel should i be putting in this old V8?
Do i need to be replacing anything in the fuel system due to this new 'improved' petrol?
I've been a diesel dude for many years...
 
yfo866 said:
I've already had a look at their stock. Compiled a long list of parts that i'd like. Currently trying to decide on whether to buy new plastic brake/clutch fluid reservoirs or opt for their ally ones.
I should be picking up a full set of brakes shoes and rear wheel cylinders after work on Saturday. If all goes well i might be driving it to Malvern on Sunday 🤞
What fuel should i be putting in this old V8?
Do i need to be replacing anything in the fuel system due to this new 'improved' petrol?
I've been a diesel dude for many years...
Click to expand...
I went for alloy ones from carbuilder solutions...dont know about fuel I use the highest octane here..
 
Shippers said:
I went for alloy ones from carbuilder solutions...dont know about fuel I use the highest octane here..
Click to expand...
How much were your alloy reservoirs? I couldn't find them on Carbuilder's website. They are over £210 for the set from Able Engineering.
 
yfo866 said:
Took better pics of the data plates in the cab and noticed one of them listed the manufacturer as MCE Limited. I googled them last night and found an MCE Limited listed online but it says they were established in 1996 so probably aren't the ones who built ambulances, but i sent them an email last night anyway.
I'm going to get a certificate from Gaydon to establish the date of manufacture as the V5C states the date as 1982 which might explain (if correct) as to why the box for the MOD reg number is blank.
Click to expand...
The military purchased a number of chassis cabs & they sat around for a bit before having an ambulance body (or other) dropped on them so the date of registration may not have anything to do with the date of manufacture. With only a production run of around 2500 these vehicles are becoming more sought after. Well done for securing one for yourself - regular propshaft greasing very important & super unleaded. If unmolested, there is an oil pressure switch that if unhappy in any way will not allow the ignition to fire up too. Lots & lots of differences in a 101 from a standard Landy, with the best being the lofty view you get when driving one! Rangie classic overdrives will fit - if you can find one even though the gearbox internals are different ( 1 ton) from the near identical externals of a classic Rangie. Have you found the differential illuminating light yet?
 
Last edited:
You must log in or register to reply here.

Similar threads

yfo866
Is there anyone with a 101 ambulance who wants £30 to...
Replies
6
Views
2K
yfo866
yfo866
M
Central lock
2 3
Replies
55
Views
1K
Datatek
Datatek
G
drivers door inner handle stopped working
Replies
17
Views
2K
GerryN
G
T
Central locking not working on all doors except drivers
Replies
6
Views
803
Stanleysteamer
Stanleysteamer
Z
TD6 2003 L322 Rangerover Sound system making a brrp,brrp,brrp when car is locked/before entering key
Replies
8
Views
692
Mark Piercy
Mark Piercy
Back
Top