Is this Bull Bar for a Freelander? Help!!!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

LandySurf

Active Member
Posts
164
Location
London / Cornwall
Is this Bull Bar for a Freelander? Help!!!!!

HELP!!! :confused:
Been on the hunt for a little while for a Bull Bar for my Freelander - the older type bull bar - that's an 'A-Frame Design' / the metal tubular shaped one

Someone sent me some pictures of a Bull Bar they'd found today, and it looks like a Freelander one, smells like one, just need to know if it is one!!

They've sent me photo's which i've attached underneath - and given me the following measurements....
3 inches thick
29 inches length


It even has the light bracket fixings in place like the Freelander ones i've seen!

What do you think? Bull Bar for a freelander?

Thanks so much
Really appreciate all your help in advance

LandySurf
 

Attachments

  • 1.JPG
    1.JPG
    368.2 KB · Views: 1,117
  • 2.JPG
    2.JPG
    412 KB · Views: 431
  • 3.JPG
    3.JPG
    385.9 KB · Views: 252
  • 4.JPG
    4.JPG
    352.3 KB · Views: 270
hi definitely not a freelander one but I recon it could be made into one just take the mounting points of the side and make them into a L shape as some early freelander ones had this kind of fitting where you put a bolt through the bumper ,But first measure it up .
hope this helps
 
hi definitely not a freelander one but I recon it could be made into one just take the mounting points of the side and make them into a L shape as some early freelander ones had this kind of fitting where you put a bolt through the bumper ,But first measure it up .
hope this helps

Hi Teddy
Thanks so much for the reply - have PM'd you regarding something.
Thanks
LandySurf
 
My '99 has side brackets in roughly that position but the bolts go horizontal through a bracket on the bumper that pokes through the plastic 'bumper/front end' moulding - so you'd need those brackets as well or fashion some up.

The bottom 'connections' should also have brackets extending to the bolts where the undertray screws in - uses the same bolt.
 
Hey Gel

Thanks ever so much for the reply
I think i'm going to have to keep looking for one......so frustrating as have looked everywhere and still can't find one!!!

LandySurf
 
Back
Top