Freelander 1 Is the front bumper a single piece?

TheLandyBus · Nov 7, 2016

The bottom section of my front bumper (the grey bit in the middle, under the numberplate) looks as though it wants to remove itself from the main front bumper of my Series 1 Facelift.

Is it supposed to come off separately or is the whole bumper one piece? I'm just wondering what the best way is to fix it back on.

Thanks.

teddywood1 · Nov 7, 2016

as far as I can remember it is all one piece but it was joined in the beginning so I suppose it will come apart

Diesel Do · Nov 7, 2016

on the facelift its plastic welded on, its not meant to come off but it will.

TheLandyBus · Nov 7, 2016

Ah, I guess some of the plastic welds have gone a bit skyward.

I wonder whether it's worth taking the whole bumper off to fix it or just to put a couple of self tappers through it to hold it in place if it gets too loose.

Diesel Do · Nov 7, 2016

Mines been off a few times now i ended up putting some nice stainless nuts and bolts through it, strategically placed it looks like a bolt on bash plate

TheLandyBus · Nov 8, 2016

Diesel Do, I don't suppose you have any pictures do you?

Diesel Do · Nov 8, 2016

You can see them on that

TheLandyBus · Nov 9, 2016

Thank you. Looks good.

Rimini-Scott · Nov 9, 2016

So I'm guessing this is the same with the rear bumper? mine has a crease in it as the previous owner ignored the parking sensors and i'd like to swap it out.

Diesel Do · Nov 9, 2016

Yeah seperate panel welded in.

TheLandyBus · Nov 12, 2016

I've got some hex head self tappers to go through and hold it together. Just need the weather now.....

Freelander 1 Is the front bumper a single piece?

TheLandyBus

Member

teddywood1

Well-Known Member

Diesel Do

Well-Known Member

TheLandyBus

Member

Diesel Do

Well-Known Member

TheLandyBus

Member

Diesel Do

Well-Known Member

TheLandyBus

Member

Rimini-Scott

Active Member

Diesel Do

Well-Known Member

TheLandyBus

Member

Similar threads