Internal Spare wheel carrier

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jrose

jrose

Active Member
Posts
102
Location
Basildon, Essex
I am thinking of moving my spare wheel from my Bonnet to the bulkhead behind the seats in my 109, I like the spare on the bonnet but it ends up a filthy mess with trees growing in it from all the seeds that drop in there, I think I've found an original one on Ebay, but there are so many different types, I'd like to keep it original, does anybody use this setup and is the attached photo the correct fitting.
 

Attachments

  • Screenshot_20190928-083101_eBay.jpg
    Screenshot_20190928-083101_eBay.jpg
    187.7 KB · Views: 243
suburban said:
looks like the one in mine, this one has the whole thing

https://www.ebay.co.uk/itm/Land-Rov...587945?hash=item4b6b68f5a9:g:iv4AAOSwijBdhkQ0

not sure on the price but I think you can still buy the whole thing new, maybe as different pieces
Click to expand...
Thankyou, I'll take a look at that one on Ebay, been trawling through tech drawings, not a lot of info about them, I think the bulkhead has pre-drilled holes for it as well. Mine has some pretty awful old parabolic springs on it, more weight at the back seems to make it a smoother ride.
 
iirc mine already had the bulkhead attachment I just had to get the bolt, wingnut and bit that holds the wheel in. Normally have the wheel on the back door but when the top is off in summer I switch to tailgate and wheel on the bulkhead.

have a spare bonnet with wheel attachment I bought but never got round to painting it and swapping, only had it 3 years :D
 
Put a wheel cover on it? If you do though make sure to reinforce the cente or else it will balloon and you won't see where you are going.
Some LWB have a trough in the tub where the front rivetted panels are and the spare sits in it.
 
On our series 3 bonnet mounted we had a cover and popped a thin sheet of marine ply on the wheel under the cover - keeps it from ballooning or filling with rainwater and washing the screen when clouting a bump in the road ...
 
suburban said:
that used to annoy me on a previous series, when you lift he bonnet after it has been raining and loads of water sloshes down into the back of engine bay :D
Click to expand...
The one that done it for me was when I went out one morning and loads of those helicopter seed things had germinated inside it, it was like a small forest lol
 
Mine fils up with water, fine until I hit 50 on the local by-pass, then it all comes out over the screen in one go!
Have a spare wheel cover but it balloons, need to sort that - will copy idea above.
 
You must log in or register to reply here.

Similar threads

L
Mantec Swing Away Wheel Carrier Parts
Replies
0
Views
615
Lumby84
L
R
BLACK SPECKLES
Replies
6
Views
666
meego
meego
T
2,5 NA to 2,25 Petrol
Replies
15
Views
1K
ThomasLRNL
T
J
Stuck Momo steering wheel
2
Replies
38
Views
3K
jwrw
J
NI_Landy
Spare wheel mounting options
2
Replies
26
Views
3K
Bobsticle
Bobsticle
Back
Top