Interior cosmetics

CakeBandit · Jan 11, 2011

Any ideas where a good place to store the engine hand crank? I was thinking maybe there was some brackets that get mounted to one of the side benches. Also I can not find anywhere on the internet a picture of the lid for the tub in the back of a 109. I want to see what kind of hinge and hasp I need to be orginal. Anybody know?

(Series 2a, 109")

JCS1991 · Jan 11, 2011

CakeBandit said:
Any ideas where a good place to store the engine hand crank? I was thinking maybe there was some brackets that get mounted to one of the side benches. Also I can not find anywhere on the internet a picture of the lid for the tub in the back of a 109. I want to see what kind of hinge and hasp I need to be orginal. Anybody know? (Series 2a, 109")

do you mean the lid for the toolbox on the back left side of the tub? if so I can take a few pics for you

oh and I did see some metal clips to hold something like a bar on the bulkhead behind the seats, if you fold the seat backs forward you might have this. worth checking out.

oxides · Jan 11, 2011

There are some Terry clips behind the front seats.

CakeBandit · Jan 11, 2011

Thank you JCS and Oxcide. Looking forward to the pics. I will check out the locations you describe and reply.

CakeBandit · Jan 16, 2011

Ok, the clips for the crank handle get attached to some holes behind the mat. I have'nt found the holes but will look and obtain some terry clips. The mat is glued on I guess so I'll have to get underneath to check it out for the place to attach the clips..

JCS1991 · Jan 16, 2011

CakeBandit said:
Ok, the clips for the crank handle get attached to some holes behind the mat. I have'nt found the holes but will look and obtain some terry clips. The mat is glued on I guess so I'll have to get underneath to check it out for the place to attach the clips..

you have a 4 door landy?

its probably different in that case, a 2door one has a bulkhead directly behind the drivers seat, this one doesn't.

CakeBandit · Jan 16, 2011

I believe I found the part number for the terry clips - 334073 or S2-334073
Maybe the 2a 109 did'nt come with the crank handle , I might just have to find a spot out of the way for it.

JCS1991 · Jan 17, 2011

CakeBandit said:
I believe I found the part number for the terry clips - 334073 or S2-334073
Maybe the 2a 109 did'nt come with the crank handle , I might just have to find a spot out of the way for it.

Yours is a 4 door landy, so it's not behind the drivers seat. Try behind the rear seats instead maybe?

Interior cosmetics

CakeBandit

Active Member

JCS1991

New Member

oxides

Well-Known Member

CakeBandit

Active Member

CakeBandit

Active Member

Attachments

JCS1991

New Member

CakeBandit

Active Member

JCS1991

New Member

Similar threads