injector pump - adjuster cover help

toms3 · Jun 3, 2014

After fitting a uprated intercooler I'd like to turn my pump up a bit too, but when trying to remove the round pressed in cover on top it wouldn't budge. Iv put a small hole in it trying to remove it so I left it on before I damaged it any more. After googling for a while I haven't been able to find a replacement one before I remove the damaged one completely - does anyone know where I could find one of these? Its a 200tdi disco engine in a 90.

Any help would be greatly appriciated !!!

toms3 · Jun 3, 2014

The cover plate looks like this.......

Any ideas, part no.s or anyone breaking a knackered pump would be great as I don't want any water getting in!

Cheers! Tom.

rebel4001k · Jun 3, 2014

You could try a engine blanking plug.

toms3 · Jun 3, 2014

rebel4001k said:
You could try a engine blanking plug.

Hmmm nice idea. Are they like core plugs in the side of the engine? Can u get different sized ones?

Thank you for that.

rebel4001k · Jun 3, 2014

They come in lots of different sizes,if you've got a good friendly motor shop take the plug from the pump with you and they might match it up.Good luck.

Garybaker · Jun 5, 2014

It's only a cover it wouldn't worry about it

timtheenchanteruk · Jun 5, 2014

end off a chair leg fits if you get the right size,

Adam1979 · Jun 5, 2014

Havent had a cover on mine for years. Aint made no difference and just makes it easier next time you want to adjust it (which you will

)

toms3 · Jun 6, 2014

Cheers, I'll leave it then, I did wonder if it was needed

injector pump - adjuster cover help

toms3

Active Member

toms3

Active Member

rebel4001k

Member

toms3

Active Member

rebel4001k

Member

Garybaker

New Member

timtheenchanteruk

Well-Known Member

Adam1979

New Member

toms3

Active Member

Similar threads