Injection pump locking screw.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Steviecops

Steviecops

Active Member
Full Member
Posts
802
Location
Colchester
1997 discovery 300tdi manual gearbox.
Reading the Haynes manual about injection pump timing and it mentions the injection spindle locking screw. There's a diagram in the manual, but on my injection pump, the screw/bolt isn't where it shows in the manual. The disco manual only goes up to N Reg, but mines a P Reg. Any idea where the locking screw might be?
 
Ah right, thanks. Apart from the licking pin and three pulley bolts, is there a similar method of timing the 300 tdi pump?
 
Yes, the Haynes manual is for all discovey 1's, but only up to N Reg. There isn't a newer manual.
I had the rave manual on my old PC, which is now with my ex wife! Lol
Ill have to download it again if I can find a link.
 
Your manual maybe for a 200, does it show the engine having 2 'V'' belts for alternator / power steering pump / water pump / fan etc or just a singe ribbed belt (300)?
 
300 pump (with added EGR gubbins)
upload_2017-2-13_22-27-49.png

200 pump
upload_2017-2-13_22-31-14.png
 
Last edited:
You must log in or register to reply here.

Similar threads

landyfun
injection pump is this?
Replies
1
Views
1K
lynall
L
W
RRC 2.5 VM diesel injection pump timing.
Replies
2
Views
1K
Wietse
W
ryeguy32118
Classic 1995 Range Rover County Classic 3.9 V8 - Idles but stalls out when in Drive or Reverse
Replies
6
Views
3K
Rangieman123
Rangieman123
S
Injection pump power screw
Replies
1
Views
1K
solmog
S
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
Back
Top