Indicators.
- Thread starter layfin
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Wildefalcon
Well-Known Member
- Posts
- 1,669
Do they come on, but not flash? Or not at all.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
Stalk is your next thing then.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
Have a look at yours, you can check the contacts easy enough with the cover off.
wireman
Well-Known Member
- Posts
- 1,169
- Location
- Warrington
The indicator contacts are a copper stud, which is touched by a stiff wire to complete the circuit. The wire might be bent or most likely the stud is dirty. Rub down the studs and make sure the wire makes good contact. Your original stalk will be far higher quality than a new one, best to clean that than buy 'blue box' new...
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
On my 109 there is a seperate flasher unit for the hazards. It could be that your indicater flasher unit has packed up but the hazard one is still ok. Mine is a.1977 so might be different.
Col
Col
