Indicator and hazards

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

sniggib

New Member
Posts
79
Hi,
My indicators and hazards have stopped working today, they have both stopped at the same time. Ive checked fuse and it was fine. Copuld this be an indicator relay? Any suggestions before i start following wires round.

1988 land rover 90, 200tdi conversion
Cheers,
 
They're fused seperately so it's unlikely to be fuses if both stopped working simultaneously - the flasher unit is the most likely candidate I reckon.
 
I had similar symptons on my 88 converted to 200 tdi - the flasher unit was knackered as well as the hazard switch (the internals had exploded). On mine, the hazards have to work to be able to operate the flashers.
 
Hi,

ok an update. Ive had the fusebox off and looked at the relay, doesnt seem to be any corrosion etc. So i put the relay back in without the cover on and tried the indicators. The magnet in the relay turns on, it makes a click, but then the plate remains attached to the magnet, i.e. the magnet stays turned on.
Does thismean the relays had it? of is there a short somewhere for it to remain on?
Finally whats a flasher unit? is this the relay behind the fusebox?

Cheers,
 
You must log in or register to reply here.

Similar threads

H
Indicators not behaving - any ideas?
Replies
6
Views
864
henrythelandy01
H
D
TD5 90 Indicator Fault
Replies
1
Views
704
KISSMYAURA
KISSMYAURA
W
My defender thinks it's a police car!
Replies
2
Views
319
vtwin
V
chrisstdt
Early 90 headlights not working
Replies
17
Views
1K
chrisstdt
chrisstdt
K
TD5 Indicator problem
Replies
19
Views
2K
Dippypud
Dippypud
Back
Top