in car heater problem! ~?

D

dantheman4.6

New Member

Posts

126

• Apr 8, 2008

• #1

Range Rover 1997, Drivers Side Works Fine Can Put Temp Up Or Down Works As Should But Passanger Side No Matter What You Do Just Blows Cold Air Out, What Could Be Causing This And How Much To Fix Any Help Much Appreciated.....

 

D

dantheman4.6

New Member

Posts

126

• Apr 8, 2008

• #2

noone?

 

wills

Well-Known Member

Posts

1,209

Location

Northamptonshire

• Apr 8, 2008

• #3

This has been covered soooooo many times, why not try searching?? Search for blend motors, both on google and on here. Theres tonnes of info out there about this problem.

-Wills

 

R

redrenger89

New Member

Posts

567

• Apr 9, 2008

• #4

Hi,
You may like to try this link
Blend Motor Diagnosis and Replacement

 

D

dantheman4.6

New Member

Posts

126

• Apr 10, 2008

• #5

redrenger89 said:

Hi,
You may like to try this link
Blend Motor Diagnosis and Replacement

Click to expand...

excellent help thankyou very much, do you know how i will get rid of the book symbol after repair as its the left hand one im going to give it a go.

 

R

redrenger89

New Member

Posts

567

• Apr 12, 2008

• #6

I hate to say it but I think its the dredded test machine that does that.
Try a new thread with "P38 _ How do I reset the book symbol" as the title.
Wills or TimoV should be able to tell you.

Cheers Fred

 

wills

Well-Known Member

Posts

1,209

Location

Northamptonshire

• Apr 12, 2008

• #7

The book symbol is one thing that doesnt need to be reset by Testbook/Rovacom/Autlogic etc. Once the fault is cured the book will dissapear.

It may keep coming back after replacing blend motors as new ones have to be calibrated using the computer. If your not fitting new ones though and just trying to repair the old one(s) you should be alright as long as you reassemble the blend motor so its in roughly the same position as when you took it to pieces.

-Wills