Ignition wiring
- Thread starter Maz66
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Which switch is it?
If you get a meter you should easily find which is the feed terminal, which is the aux and which is the start.
The start terminal is the one which usually has a spring return on it which will then give you a circuit to the aux position.
If you get a meter you should easily find which is the feed terminal, which is the aux and which is the start.
The start terminal is the one which usually has a spring return on it which will then give you a circuit to the aux position.
Mine was originally Petrol is this pic any help
Photograhed from drivers side above.
So you would need to fasten the switch in position.
White red is the wire to starter motor solenoid Behind that is the large brown which is the supply second brown wire in same place is the horn supply,The white is ignition live . The two browns at front are add on wires on my vehicle.
The diesel solenoid needs connecting to the old ignition coil supply .which was white with black tracer.
Worth putting the switch in place then just connecting the brown then turn key to 1st on position and check for voltage on the different connections the white one should come on if not turn key to starter postion then release and check again.
Photograhed from drivers side above.
So you would need to fasten the switch in position.
White red is the wire to starter motor solenoid Behind that is the large brown which is the supply second brown wire in same place is the horn supply,The white is ignition live . The two browns at front are add on wires on my vehicle.
The diesel solenoid needs connecting to the old ignition coil supply .which was white with black tracer.
Worth putting the switch in place then just connecting the brown then turn key to 1st on position and check for voltage on the different connections the white one should come on if not turn key to starter postion then release and check again.
Last edited:
Discovery relay is very simple to instal for glow plugs.
View attachment 200 tdi glow plug relay wiring.pdf
View attachment 200 tdi glow plug relay wiring.pdf
