Ignition switch steering lock

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bdwarb1

Bdwarb1

Member
Posts
32
Location
Lancashire
Hi
Switched off my ignition and engine running - took the key out too. Put it in and fiddled and it switched off. Started it since and all ok - it switched off fine. Ordered a new ignition and lock - any idea how I replace? Is it an easy job for someone new?
Cheers
B
 
Remove steering cowling.
Centre punch the shear bolts out.

Remember where the cables on the back go. It's a tight job

Hope this helps
 
Hicap phill said:
Remove steering cowling.
Centre punch the shear bolts out.

Remember where the cables on the back go. It's a tight job

Hope this helps
Click to expand...
Thank you for the reply....appreciated. I have ordered a new part......I was worried about it being runaway but I think this would not respond to the ignition being turned again.
 
Bdwarb1 said:
Thank you for the reply....appreciated. I have ordered a new part......I was worried about it being runaway but I think this would not respond to the ignition being turned again.
Click to expand...
It does sound like the barrel has gone, but you could do with someone like @Kwakerman reading this, to see if there are other possibilities first. As Hicap phill says, it's a very tight job taking the barrel off in situ. I took mine off with the steering column off the Landy. The shear bolts (on my 1996 vehicle anyway) were made of a surprisingly soft alloy. I cut a groove in them to get a screwdriver blade in. Very hard to do in situ. You'd know if the engine was in runaway. It would rev extremely highly and you'd shat yourself very quickly. :)
 
A mate had a similar issue with his 2009 90. Put some lube into ignition barrel and been fine since [ 2 years ago ]
Engine runaway has nothing to do with the ignition switch and turning it off would not help.
 
tottot said:
A mate had a similar issue with his 2009 90. Put some lube into ignition barrel and been fine since [ 2 years ago ]
Engine runaway has nothing to do with the ignition switch and turning it off would not help.
Click to expand...

Would not stick in first,foot on brake and hand brake on drop clutch stall engine stop runaway.. think I remember doing it on a mates Astra van...
 
Al2O3 said:
It does sound like the barrel has gone, but you could do with someone like @Kwakerman reading this, to see if there are other possibilities first. As Hicap phill says, it's a very tight job taking the barrel off in situ. I took mine off with the steering column off the Landy. The shear bolts (on my 1996 vehicle anyway) were made of a surprisingly soft alloy. I cut a groove in them to get a screwdriver blade in. Very hard to do in situ. You'd know if the engine was in runaway. It would rev extremely highly and you'd shat yourself very quickly. :)
Click to expand...
Cheers for the help
 
You can also drill out the sheer bolts faril easily and I find it quicker than messing around turning them with a punch, as @Al2O3 says they are fairly soft.
 
I've changed two ignition barrels, one on a series 3 and the other was a ford escort. Both still had the shear bolt heads intact so I was lucky. When I replaced them I didn't shear the new bolts in case I had to do it again.

Col
 
Not sure about these new fangled 2008 ones but on earlier models I thought you could change the switching part of the switch (if that makes sense) in situ so you don't need to change the barrel & key bit. That said, I've not done it on mine as it hasn't gone wrong!
 
You must log in or register to reply here.

Similar threads

D
2009 Defender 110 TD 5 Ignition switch
Replies
0
Views
529
driftwoodmeg
D
T
Ignition staying running if key removed and lights are on?…⚡️🤔🙄
Replies
7
Views
653
RustyDefender
RustyDefender
R
Ignition barrel position
Replies
6
Views
847
reiny
R
Ola66
L322 2007 Vogue SE 3.6TDV8 Doesn't recognise key fob, can't turn key in ignition or turn off alarm!
Replies
5
Views
795
Graculus
Graculus
L
Steering lock / alarm problem
Replies
1
Views
471
bankz5152
bankz5152
Back
Top