Ignition barrel removal Disco 2 TD5

Farmer57 · Oct 31, 2018

Hi, first time posting so I hope I’ve put this in the right place!

Any advice would be great. I have recently taken my ignition (with steering column) out of my Disco 2 as I had the common problem of the key not turning in the lock. Anyway, I can’t seem to get the actual barrel to come out of the sleeve. It seems there’s a pin holding it in but I can’t figure out how to get it out!! I was hoping to get it out to see what’s causing the key to stick.

Any help is much appreciated.

brian47 · Oct 31, 2018

I'm pretty sure that the pin which hold the gubbins of the lock in place in the barrel has to be drilled out with a Dremel type tool.
There's plenty of videos on the tube but this one should give you some idea:-

Personally, I'd replace the lock assembly complete.

brianconwy · Oct 31, 2018

It is very fiddly when you take the barrel apart. I just bought a cheap replacement.

Lazydave · Nov 1, 2018

If you tap the end of the key when in the barrel it can help fix the issue.
Did on mine and was still working 8 months on.

Discodevon · Nov 4, 2018

To remove the barrel you can use and old chisel

Ignition barrel removal Disco 2 TD5

Farmer57

New Member

brian47

Well-Known Member

brianconwy

Well-Known Member

Lazydave

Well-Known Member

Discodevon

Well-Known Member

Similar threads