If you could make a conversion plate to fit any engine to an LT77

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nobber

nobber

Well-Known Member
Posts
10,551
Location
Arse!
And you were after something economical, easy to work on and maintain, fairly cheap to buy and fairly common second hand, diesel, fair amount of power but not too much and not much hassle to fit, what engine would you choose?
 
The problem is just about any modern diesel of 2 litre or above capacity will murder an lt77.

Ive spent the last 4 days in an auto toyota verso thing and quite frankly its a piece of carp, BUT was still way better then any defender for journey work!
 
That's why I am not after power , the LT77 isn't a bad box and its far from weak if you don't hammer the crap out of it. Basically I want an engine much the same as my 19j or a 200tdi , easy to work on , simple , no electronics etc etc but I also want economy , cheap , plentiful etc.

Does such a thing even exist??
 
nobber said:
That's why I am not after power , the LT77 isn't a bad box and its far from weak if you don't hammer the crap out of it. Basically I want an engine much the same as my 19j or a 200tdi , easy to work on , simple , no electronics etc etc but I also want economy , cheap , plentiful etc.

Does such a thing even exist??
Click to expand...



yes a 200tdi and g suffix lt77
 
jamesmartin said:
yes a 200tdi and g suffix lt77
Click to expand...

Have you seen the price of fender 200's lately James? Those are really not cheap, even disco ones are getting dear, and I am under the impression parts are becoming hard to come by these days? Not to mention most 200's these days are way way over the hill by now.
 
nobber said:
Have you seen the price of fender 200's lately James? Those are really not cheap, even disco ones are getting dear, and I am under the impression parts are becoming hard to come by these days? Not to mention most 200's these days are way way over the hill by now.
Click to expand...
most engines suitable are way over the hill but a tdi is superbly rebuildable
 
Ive got two one is okay and other is well shagged both still run and drive pretty much the same, just one breathes a lot more at the end of the journey!
Tbh Ive not noticed a shortage of parts for them, everything I want is online.
 
jamesmartin said:
most engines suitable are way over the hill but a tdi is superbly rebuildable
Click to expand...

It sounds easy and I know it wouldn't be difficult but I really cant be arsed rebuilding an engine and don't fancy spending 600+ on something that will probably also require working on thus costing even more, I know it would be an easy install though, even a disco one , it could well be the path of less resistance.
 
Rougharse Racing said:
300 tdi, still plenty about, easy replacement for a 19J and bolts up to a 4cyl LT77.
Click to expand...

They are cheap enough still, I reckon a better choice than a 200, how close to the bulkhead do they get to when you use an lt77 and do you need a modified exhaust to suit the engine, I'm sure you would cos it will sit further back in the engine bay?
 
The 300tdi fitted to a LT77 sits exactly where the 19J sits. A standard 300 exhaust down pipe fits if you take 6" out of it and put a cut out in the engine crossmember.
P1080759.JPG
P1080782.JPG
P1080754a.jpg
 
nobber said:
Have you seen the price of fender 200's lately James? Those are really not cheap, even disco ones are getting dear, and I am under the impression parts are becoming hard to come by these days? Not to mention most 200's these days are way way over the hill by now.
Click to expand...

Easy to rebuild though and all the main bits are available still
 
The parts shortage for 200TDis is a myth. OK, the breakers aren't full of them but you can get anything from a rocker valve cap to a short engine. Have a look at Turner Engineering's website for an example. And they must be the simplest conversion - purely nuts and bolts.
 
You must log in or register to reply here.

Similar threads

xDParis64
Freelander 1 Skid Plate Bolt Sizes + Engine Compression
Replies
19
Views
770
J_D
J_D
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
789
tottot
tottot
M
Pump to the steering box pipe
Replies
4
Views
876
mma59
M
T
2,5 NA to 2,25 Petrol
Replies
15
Views
1K
ThomasLRNL
T
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
366
xDParis64
xDParis64
Back
Top