I seem to have lost part of my loom

here is a photo of the coolant outlet pipe on a 2002 Freelander K-series. I have just done the HG etc with the help of a friend who is a professional mechanic.

When it came time to reconnect the loom I could not find anything to connect to the blue socket circled that comes off the coolant outlet pipe.

So
1. should there be a cable connected to this blue socket?
2. if yes to (1) then where physically in the engine bay should I be looking for this cable as I just cannot find any spare unconnected cables

Cheers
Simon

Everything you need is here:

http://macassemble.com/lrm/freelander/Freelander Electrical Library (2002).pdf

Complete electrical library for the 2002 Freelander. Has colour pics of all the connectors, so you can flick through and work out what that connector is for.

thanks for the pdf link. that blue connector isn't listed so I've decided it is just there to confuse poor saps like me - there's definitely no cable from the loom to plug into it.

I also had the MIL light up on the dash with a P0170 code so I thought the ECU couldn't read engine temp & so couldn't adjust the mix correctly - but I traced that back to a bad O2 sensor on the exhaust manifold - swapped that out and the MIL went out & the code went away

Cheers
Simon

Glad it helped.