I need a bit of help...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

David g4yvm

Active Member
Posts
97
Location
Salisbury
Time to show utter ignorance...

In the attached photo, not mine, i have outlined a pulley. In my 110 the device that is behind that pulley is loose on the frame and needs tightning up - if i shake the pulley the whole device moves, the pulley is still securely fatsend to its own thing...whatever it is. Trouble is, im not sure whats behind it or how it fastens to the engine frame. I know how to loosen the belts and get them off but what awaits? Is it just secured with through bolts or am i looking for something else?
 

Attachments

  • Screenshot 2023-07-31 at 14.31.09.png
    Screenshot 2023-07-31 at 14.31.09.png
    2.6 MB · Views: 173
David g4yvm said:
Time to show utter ignorance...

In the attached photo, not mine, i have outlined a pulley. In my 110 the device that is behind that pulley is loose on the frame and needs tightning up - if i shake the pulley the whole device moves, the pulley is still securely fatsend to its own thing...whatever it is. Trouble is, im not sure whats behind it or how it fastens to the engine frame. I know how to loosen the belts and get them off but what awaits? Is it just secured with through bolts or am i looking for something else?
Click to expand...
If you’re talking about what that pulley is driving, it will likely be your power steering pump
 
Sorry, its a 200tdi.

Thanks Meego. I THOUGHT it was either PS pump or alternator. Is the pump fastened using simple through bolts, case the frame?
 
Red line pointing to power steering pump, yellow line pointing to alternator.
 

Attachments

  • 20230731_183107.jpg
    20230731_183107.jpg
    662.8 KB · Views: 135
David g4yvm said:
Sorry, its a 200tdi.

Thanks Meego. I THOUGHT it was either PS pump or alternator. Is the pump fastened using simple through bolts, case the frame?
Click to expand...
The PAS pump will be mounted to that plate with the slots you can see. You use a 1/2 strong bar in the square hole you see to tension the belts. The PAS pump will have the fluid pipe attached to it.
 
tottot said:
Looks like the power steering pump is loose on its mounting plate from what is said in the OP.
Click to expand...
I would agree but need OP to confirm if the pulley and pump are loose in relation to the flat metal plate or if the whole plate is loose (less likely).
But for the op here is what makes up the pas pump and the flat plate for tensioning the belt. It looks like it is actually four bolts holding the pump in place on the flat plate. But to get to them you you probably have to remove the three bolt holding the pulley on.

As a side note if you do not already have one download a parts catalogue (quick google for the pdf) as it is very useful for thing like this where you want to know what is behind things and how it comes apart.

1690995444764.png
 
Long delay, soory.

Thanks for all the fab help. The pully and pump are still together but loose from the plate on which they seem to have been mounted. The tensioned arm is still tight, so the two belts are also tight - but the pump assy is simply very loose. The mounting bolts may well have been lost.
 
Right, sorted.

Thanks to your kind guidance I now know I need four off m6 x 20mm bolts, my steering pump having lost all four of them.

Thanks guys (and gals if there was one)

Bolts found, after a fashion, fitted, tightened and running again. Thanks all....off to salisbury plain now to exercise Old Red (the landrover...she's old...and red)
 
Last edited:
David g4yvm said:
The explosion above seems to show that only two bolts, 3 and 4, actually hold the pump to the plate. Is that right?
Click to expand...
It takes a little bit of learning how to read the parts diagram but as you discovered it is held to the placte by 4x bolt number 3. i would oncea gain advocate for finding and downloading youself a copy as I find the parts book invaluable for things like this.

David g4yvm said:
Bolts found, after a fashion, fitted, tightened and running again. Thanks all....off to salisbury plain now to exercise Old Red (the landrover...she's old...and red)
Click to expand...

Good to hear you are back up and running and good to hear you have chosen the correct colour as well, far better than everyone else blue or green ones!
 
You must log in or register to reply here.

Similar threads

Wizard2003
Update, Need Urgent help!
Replies
14
Views
2K
Wizard2003
Wizard2003
M
Newbie in market for LHD Series 3, need advice
Replies
8
Views
642
saxavordian
saxavordian
tweedandbriar
Need a bit of guidance....
Replies
1
Views
373
tweedandbriar
tweedandbriar
R
1998 defender pickup rebuild. I need help.
2
Replies
26
Views
1K
re-volt
R
C
Military series III, does it have a different water pump? Why?
Replies
13
Views
2K
Wolf Pack
W
Back
Top