Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
I read something similar, mixes up the wrong side motor or something, bit like the abs sensors.
P38A Hvac motor query.
- Thread starter Flossie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,886
- Location
- Near Poitiers SW France
Worked on one of mine, on the other, it went to recirculate and then refused to move back.Worked on mine
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Mine works, at least it seemed to get colder inside using the ac on a very hot day.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Where is this 4th motor?
- Posts
- 33,600
- Location
- North Shropshire
- Posts
- 33,600
- Location
- North Shropshire
Must be at/near the pollen filter/blower motor? I'm not sure
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Number 8 in the rave pic up there ^^^^^ then.
What's them things?
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Motors?
- Posts
- 33,600
- Location
- North Shropshire
Could be
- Posts
- 33,600
- Location
- North Shropshire
Potentiometers, the bits that fail in the motors. They tell the ecu where the flap is in its travel
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
How much to buy?
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
If yer selling.
- Posts
- 33,600
- Location
- North Shropshire
They are no use to me anymore
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
I'll send yer a pm.
- Posts
- 4,653
- Location
- Rotherham
How many do you have kermie. I could do with 2 please
- Posts
- 12,628
- Location
- Sud ouest France !
Sometimes the little leg solder points on the pots can become cracked where they enter into the circuit board. Resoldering can sometimes cure this. They are quite fragile really but have lasted this long I suppose. 
- Posts
- 4,653
- Location
- Rotherham
One motor I bought second hand off the bay wouldn't work when fitted. The potentiometer wasn't even thereSometimes the little leg solder points on the pots can become cracked where they enter into the circuit board. Resoldering can sometimes cure this. They are quite fragile really but have lasted this long I suppose.
- Posts
- 12,628
- Location
- Sud ouest France !
Barstools!!!!One motor I bought second hand off the bay wouldn't work when fitted. The potentiometer wasn't even there
- Posts
- 33,600
- Location
- North Shropshire
I've posted 4 to @Flossie, kept a couple back 'just on case'. He said he'd send some on over.
- Posts
- 4,653
- Location
- Rotherham
Cheers
