I have tried to source some info on fitting powerfold mirrors to my early FL1. (99 L series). I have read that its easy, but you should remove the gasket before you fit them. I did this when i fitted the RH mirror here the other day, but i found a leak so took a new look at it today and got them both fitted with the gasket in place.
After dismantling your old mirror you have to bore out two holes in the door skin.
When this is done you have to cut where the bolt fastens at the mirror about 3mm over the gasket.
Very easy job indeed. Here im done and just need to get the wiring done.
After dismantling your old mirror you have to bore out two holes in the door skin.


When this is done you have to cut where the bolt fastens at the mirror about 3mm over the gasket.

Very easy job indeed. Here im done and just need to get the wiring done.


Last edited: