Freelander 1 How many auxilary belts on TD4
- Thread starter dog-man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
2
main one and one for ac
main one and one for ac
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
if you are going to change the air con if you have it take a good look at you main belt if it has any cracks in it change that at the same time as well as you have to take it off any way to get at the air con and vice versa and the main one I always think of being like a letter 8 but not meeting in the middle
I will have them both done as I don't know when they were last changed. I have had the FL almost 5 years now.
I am planning a lengthy trip around Europe next year so want to get everything sorted before that trip.
I will have the VCU replaced at some point this year. Not having any issues with it, but I might as well for peace of mind.
Will also change oils in diff and gearbox too and anything else that doesn't come to mind at the moment.
New tyres too.
I am planning a lengthy trip around Europe next year so want to get everything sorted before that trip.
I will have the VCU replaced at some point this year. Not having any issues with it, but I might as well for peace of mind.
Will also change oils in diff and gearbox too and anything else that doesn't come to mind at the moment.
New tyres too.
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
PQS000180
PQS101300
PQS101300
Arctic2
Well-Known Member
- Posts
- 2,735
- Location
- Westmidlands
Attachments
GrumpyGel
Well-Known Member
- Posts
- 26,385
- Location
- Christchurch, New Zealand
Does the TD4 have a belt to drive the fuel pump?
No. The HP pump is driven by the timing chain.
It's quite a robust setup, unlike the injectors themselves.
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
i have just had the high pressure pump done on mine as it is too much for me with my back and I leant the garage the tools to do it as the son in law was away on holiday when it decided to leek badly and dog man do not for get to have the oil changed in the ird
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
Its a pig of a job 1st time you do it ,piece of **** 2nd time, jack up driver front an chock it safe ,take off plastic cowell , best take a pic of belts case you forget locations, I just cut the old belts, do ac first this is easy, tension using the can just twist with finger and thumb rule 
then make sure you have correct size no off set ring spanner long reach or like i do big adjustable, fiddle like feck to get belt in correct possition ,the last bit is to pull the tension adjustment clockwise , and slip belt over last pully, um no good if youve a bad back . . . . .i got Porky to do it (eeze er furra bred)
then make sure you have correct size no off set ring spanner long reach or like i do big adjustable, fiddle like feck to get belt in correct possition ,the last bit is to pull the tension adjustment clockwise , and slip belt over last pully, um no good if youve a bad back . . . . .i got Porky to do it (eeze er furra bred)
