How do you clean your engine and bay??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

drfoster

Well-Known Member
Posts
259
Location
Wolverhampton
evening all,

any recommendations for cleaning engine and engine bay? i've always avoided doing this following a near disaster 30 years ago with a Talbot samba (long story!!) , but want to give my 110 300tdi a spruce up in the engine department. what potions do people recommend to shift oil, grease and accumiulated detritus??

I have some autobrite products which i might try, extreme bike clean, chain and sprocket degreaser etc. but do you use Jetwash, steam clean, hosepipe etc? do you leave your engine running? do you avoid any parts??

cheers in advance

Steve
 
I like Gunk and a reasonably stiff(ish) brush, followed by more Gunk and then a jetwash on its medium to low setting.. Avoid the delicate bits like the radiators and intercooler etc and dont concentrate the spray into the fuses, alternator or the bunch of electical connections by/below the clutch master cylinder.

You haven't said but I presume you have a diesel engine ?
If it's petrol then ypou need to cover the distributor with a placcy bag first.

Use an airline to blow dry the engine/electics and get any pools of water out of the nooks and crannies.

Pictures ... we like pictures
 
Last edited:
miktdish said:
I like Gunk and a reasonably stiff(ish) brush, followed by more Gunk and then a jetwash on its medium to low setting.. Avoid the delicate bits like the radiators and intercooler etc and dont concentrate the spray into the fuses, alternator or the bunch of electical connections by/bepow the clutch master cylinder.

You haven't said but I presume you have a diesel engine ?
If it's petrol then ypou need to cover the distributor with a placcy bag first.

Use an airline to blow dry the engine/electics and get any pools of water out of the nooks and crannies.

Pictures ... we like pictures
Click to expand...
Great advice, thankyou. its a TDi diesel so no dizzy to worry about. good plan for the airline, i haven't got one but do have a pump i got for blowing a paddling pool up and i use it for blowing the water off my motorbike once i've washed it.

i'll remember to do a before and after.

cheers

Steve
 
I use TFR and rinse it with a hose, careful on bare Ali though.
Washed it with a sponge before blasting with pressure washer.
In general I can't be bothered so blast the top of engine with brake cleaner and an old t shirt.
It's not even my truck!
Mine, never done the engine bay.
 
Last edited:
Anaconda said:
I use TFR and rinse it with a hose, careful on bare Ali though.
Washed it with a sponge before blasting with pressure washer.
In general I can't be bothered so blast the top of engine with brake cleaner and an old t shirt.
It's not even my truck?
Mine, never done the engine bay.
Click to expand...

Get an old paint brush for the stubborn bits ...
 
You must log in or register to reply here.

Similar threads

J
Your favourite engine bay cleaner
Replies
12
Views
1K
flat
flat
Longstride
Series 3 engine replacement - options and advice?
2 3
Replies
41
Views
9K
Blackburn
Blackburn
Saint.V8
300Tdi Cambelt Change - How To.....
Replies
14
Views
29K
towsey956
towsey956
Saint.V8
200TDi Timing belt change and cylinder head refresh HOW TO...
Replies
6
Views
9K
toms3
T
hd3
Why Injectors Fail and ..
Replies
5
Views
4K
hd3
hd3
Back
Top