how do i remove body from disco 1 chassis

jeffdisco1 · Dec 9, 2013

Evening all, could anyone help me i have recently bought a discovery 1 200tdi and would like to remove the body from the chassis i am aware there are 8-10? mounting points but what else would need to be undone/removed to enable me to lift the body off the chassis? all help appreciated thanks in advance

robint · Dec 9, 2013

might have to drop the rad , extend the gear levers , and possibly extend the steering box spline

Paulmitchell1984 · Dec 9, 2013

welcome to the site...10 bolts then big hammer and a helicopter

jeffdisco1 · Dec 9, 2013

Paulmitchell1984 said:
welcome to the site...10 bolts then big hammer and a helicopter

i cant find my helicopter:doh:

jayf12000 · Dec 10, 2013

have never done this but off the top of my head i'd say brake hoses, clutch slave cylinder, handbrake cable, fuel filler hose, engine wireing, i'm sure there's more just cant think of them.

chrisyleigh · Dec 10, 2013

As above , my guess is ,rad, intercooler, wiring , brake lines , accerlater cable , remover air box , windscreen washer lines , expantion bottle
Basicly any thing thats connected to both body and engine/chassie

jeffdisco1 · Dec 10, 2013

brilliant thanks for the help!

quattro6999 · Dec 10, 2013

All body mounts (obviously) rad, brake lines, center console out, rear seat belt to chassis mounts, handbrake cable filler hose, coolant pipes to bulkhead, engine wiring loom, steering column, any earth straps. Think that is all.....oh, onenof these helps too

how do i remove body from disco 1 chassis

jeffdisco1

New Member

robint

Well-Known Member

Paulmitchell1984

Well-Known Member

jeffdisco1

New Member

jayf12000

Member

chrisyleigh

Active Member

jeffdisco1

New Member

quattro6999

New Member

Attachments

Similar threads