HID conversion Error Free

JohnnyCrash · Sep 20, 2012

Well this has certainly divided opinions?! To bo honest I don’t really care if you like them, hate them or don’t even know what they are! I was just letting anyone that does want them fitted – how to fit them without getting the error on the dash every time you switch from dip to high beam

2.0_hippo · Sep 20, 2012

JohnnyCrash said:
Well this has certainly divided opinions?! To bo honest I dont really care if you like them, hate them or dont even know what they are! I was just letting anyone that does want them fitted how to fit them without getting the error on the dash every time you switch from dip to high beam

:clap2:

wammers · Sep 20, 2012

JohnnyCrash said:
Well this has certainly divided opinions?! To bo honest I dont really care if you like them, hate them or dont even know what they are! I was just letting anyone that does want them fitted how to fit them without getting the error on the dash every time you switch from dip to high beam

Ok you are enthusiastic about your new toy. BUT you didn't post anything. Was that an oversight or did you get carried away with excitement?

mcapinha · Sep 20, 2012

:5blurk5:

JohnnyCrash · Sep 20, 2012

wammers said:
Ok you are enthusiastic about your new toy. BUT you didn't post anything. Was that an oversight or did you get carried away with excitement?

See first post??

JohnnyCrash · Sep 20, 2012

wammers said:
I drive down lots of country lanes i don't have any problem with the standard lamps, which are more than adequate. Maybe you are going blind. Or have never been blinded by these stupid HID lamps like many of us have. They are a danger to other road users.

I am actully white blind in 1 eye, and so in answer to your question YES I am going blind!

Pete The Biker · Sep 20, 2012

wammers said:
Ok you are enthusiastic about your new toy. BUT you didn't post anything. Was that an oversight or did you get carried away with excitement?

I agree with Wammers - there is no wiring diagram in the first post! (phew! though it was just me being stupid!).

Pete

JohnnyCrash · Sep 20, 2012

wammers · Sep 20, 2012

There is still no diagram on the first post, so where the hell do you get that screen shot from?

JohnnyCrash · Sep 20, 2012

wammers said:
There is still no diagram on the first post, so where the hell do you get that screen shot from?

From the first post?? I can see it and I've only 1 eye??

wammers · Sep 20, 2012

JohnnyCrash said:
From the first post?? I can see it and I've only 1 eye??

On your first post there is NO wiring diagram. Only if you press quote it does show a Jpeg link but not a diagram. And iv'e got two eyes.

Thread Tools Search this Thread Rate Thread
#1
Yesterday, 15:04

JohnnyCrash
Senior Member

Join Date: May 2012
Posts: 376
HID conversion Error Free
Here is a wiring diagram anyone can follow - no matter how bad you are with eleccy

L

JohnnyCrash · Sep 20, 2012

wammers said:
On your first post there is NO wiring diagram. Only if you press quote it does show a Jpeg link but not a diagram. And iv'e got two eyes.

must be something at your end then??

mcapinha · Sep 20, 2012

He probably included a link to a file on his local hard drive... used to happen all the time back in the beginning of the internets.

JohnnyCrash · Sep 20, 2012

mcapinha said:
He probably included a link to a file on his local hard drive... used to happen all the time back in the beginning of the internets.

No it's uplaoded to photobucket - same as all the other pictures I have posted

wammers · Sep 20, 2012

JohnnyCrash said:
No it's uplaoded to photobucket - same as all the other pictures I have posted

Believe me Johnny mate there is no diagram on post one. And no link unless you press quote to place an answer.

JohnnyCrash · Sep 20, 2012

wammers said:
Believe me Johnny mate there is no diagram on post one. And no link unless you press quote to place an answer.

Not calling you a liar - but don't think of me as an idiot either

wammers · Sep 20, 2012

JohnnyCrash said:
Not calling you a liar - but don't think of me as an idiot either

I don't think you are. But that still does not mean there is a diagram on post one because there isn't. Others have said this also. Just for the record how many people reading this can see a wiring diagram on post one?

Freelaner · Sep 20, 2012

there int one................

wammers · Sep 20, 2012

JohnnyCrash said:
Here is a wiring diagram anyone can follow - no matter how bad you are with eleccy

This is how the page looks after you have pressed quote to answer. But no link and no diagram appears on the original post. As a matter of fact when i posted that the link that i copied disappeared. So something is wrong. It won't let me copy the link. If i press edit the link comes back up then disappears when i press save. Bloody odd that.

wammers · Sep 20, 2012

johnnycrash-albums-range-rover-picture11009-hid-conversion.jpg

[/QUOTE]

Right i have copied the link above this and i can see it. But bet it disappers when i press submit reply. (Edit) It bloody does what the hell is going on?

HID conversion Error Free

New Member

Well-Known Member

No longer with us, RIP

Active Member

New Member

New Member

Active Member

New Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

Active Member

New Member

No longer with us, RIP

New Member

No longer with us, RIP

Landy Driver

No longer with us, RIP

No longer with us, RIP

Similar threads