Hi! New to the site and in need of advice!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lpm said:
Thanks again Marjon, I was getting a bit disheartened about buying one. I think it's doable, I just need to be on it with security and insurance.
Click to expand...

I really don't like paying out for insurance, I will repair things myself and if I stuff the car into a ditch, its my fault afterall and I should pay the cost. Same if I back into something, its my fault, i'll pay.

If it gets nicked, again its my fault as I wasn't paying attention or i'd left it somewhere stupid in an 'easy to steal' configuration.
Consequently my insurance (the minimum I can get away with) is a pint shy of £100 a year and has (unfairly IMO) crept up from £63 five years ago.
 
Anaconda said:
Unless you have a Thatcham approved alarm/immobiliser don't declare your security as if its not fitted and it goes missing they won't pay out, maybe.
We look forward to the pics when you buy one.
Click to expand...
Might be a while before I finally get my hands on one, they're very hard to find (decent ones!)
 
Long overdue update!

So after a very long summer of looking and traveling all over to try out landies I did in the end find one that I wanted.

She's no show pony, thats for sure, just a good old working pick up with a whole tonne of dents and scratches.
379349625_122131986008002711_5297490845886535768_n.jpg


LOVE.HER.TO.DEATH!

Honestly, she probably will kill me as there is so much work to be done on her. But I hope I'm doing my bit to keep them from going extinct!

Thanks for all the advice, no doubt I'll be badgering you all some more when everything starts to break (that isnt already broken!)

Cheers
Matt
 
lpm said:
Long overdue update!

So after a very long summer of looking and traveling all over to try out landies I did in the end find one that I wanted.

She's no show pony, thats for sure, just a good old working pick up with a whole tonne of dents and scratches. View attachment 304234

LOVE.HER.TO.DEATH!

Honestly, she probably will kill me as there is so much work to be done on her. But I hope I'm doing my bit to keep them from going extinct!

Thanks for all the advice, no doubt I'll be badgering you all some more when everything starts to break (that isnt already broken!)

Cheers
Matt
Click to expand...
Dents / scratches? from a fender point of view looks like a minter to me!
 
I dont intend on bodywork repairs, I like all the dents, part of her history. Chassis is ok, a few repairs but solid enough to last a good few years while I save for a galv. Bulkhead does have some rust in the usual places which will need addressing, in fact thats the first big job I think will need doing. It's not terrible, I've seen much worse, but it is my no.1 concern.

Also, I thought she was a 19j but she has had a 200tdi put in thats done about 80k. I'm going to guess its a disco 200, not the native landy version. I'll post a pic at some point to see if anyone can confirm.

For now though, Im slapping on some lanoguard for winter and fixing all the niggles I can that dont cost a fortune.

Once again folks, thanks for all the advice!
 
Recon she was a 19j [ couple of little clues I can see ] Take a pic of exhaust side of engine.
Slap on your preservative of choice [ mine is diesel and fresh engine oil ] and remember to get it into the inner chassis rails. Plenty of threads on good preservation methods on here.
Mine is similar age and chassis bulkhead has had only minor welding over the years despite being a working farm truck that lives by the sea.
 

Attachments

  • LR8.JPG
    LR8.JPG
    452.3 KB · Views: 105
  • LR14.JPG
    LR14.JPG
    345.6 KB · Views: 104
  • LR5.JPG
    LR5.JPG
    348.3 KB · Views: 98
That’s a very tidy Landy! Make sure you invest in lots of decent security measures for it before anything else. There are lots stolen in Surrey and the Home Counties. Be careful where you leave it parked too.
 
tottot said:
Recon she was a 19j [ couple of little clues I can see ] Take a pic of exhaust side of engine.
Slap on your preservative of choice [ mine is diesel and fresh engine oil ] and remember to get it into the inner chassis rails. Plenty of threads on good preservation methods on here.
Mine is similar age and chassis bulkhead has had only minor welding over the years despite being a working farm truck that lives by the sea.
Click to expand...
Thanks for the tips. Xmas hols are incoming so I'm reserving some time for a proper under-clean and then get her protected! Diesel and engine oil looks like it does the trick!
 
You must log in or register to reply here.

Similar threads

T
Impact Sockets?
2
Replies
36
Views
2K
yfo866
yfo866
7
110 pick up advice
Replies
15
Views
941
V8bob
V
T
Marsland Chassis
Replies
3
Views
596
ER1C
ER1C
R
Value advice
Replies
2
Views
394
miktdish
miktdish
N
Security Upgrades
Replies
17
Views
660
TrevD
T
Back
Top