Hi all newbie here

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

Telbr7

Member
Posts
15
Telbr7 said:
Hi peeps just bought a cheap landover freelander 1 I bought some new brake pads from Halfords and seem very tight with piston pushed right back I’ll attach pic of box what they gave me if u knowledgeable people could tell me if they are the right ones couldn’t get back to shop , useless in there anyway it’s a 2005 thanks in advance
 

Attachments

  • IMG_6809.jpeg
    IMG_6809.jpeg
    218.5 KB · Views: 65
Telbr7 said:
Telbr7 said:
Hi peeps just bought a cheap landover freelander 1 I bought some new brake pads from Halfords and seem very tight with piston pushed right back I’ll attach pic of box what they gave me if u knowledgeable people could tell me if they are the right ones couldn’t get back to shop , useless in there anyway it’s a 2005 thanks in advance
Click to expand...
Thats your second mistake - buying bits from halfrauds. Plenty of good supplies on interweb for all parts. Just ask on here.

Your first mistake was buying a FL1 🤣
Just kidding - we love them round here.

Part number looks right. Not sure why it has what looks like a date of 2010>, as F1 stopped in 06.
 
Freddie17 said:
Thats your second mistake - buying bits from halfrauds. Plenty of good supplies on interweb for all parts. Just ask on here.

Your first mistake was buying a FL1 🤣
Just kidding - we love them round here.

Part number looks right. Not sure why it has what looks like a date of 2010>, as F1 stopped in 06.
Click to expand...
Think you'll find that is probably Oct 2000 - ie for the vented brakes.

Would be better to use VIN numbers.
 
Is piston right back ? Did you open bleed valve when winding piston back to avoid damaging the ABS modulator seals? If you don't do that the seals fight you and you can't get piston right back. Are the slide pins free and working to allow the caliper holder to slide freely and allow both pads to work properly?

They look like the correct pads.
 
Last edited:
Halfords were cheaper for drop links by a fiver compared to euro car parts. That was before trade card discount.
Check your part number with advanced factors we site.
 
Hi,

FL1 TD4 ? The pads references seems good.

When you put the new brake pads, they should fit easily, if not you have forgot do some cleaning.

Regards.
 
I bought plugs, leads, coil pack and water pump from Halfords for my Focus.
Far cheaper than Eurocarparts and more convenient, I was also surprised. (Exact same parts)
 
andyfreelandy said:
Is piston right back ? Did you open bleed valve when winding piston back to avoid damaging the ABS modulator seals? If you don't do that the seals fight you and you can't get piston right back. Are the slide pins free and working to allow the caliper holder to slide freely and allow both pads to work properly?

They look like the correct pads.
Click to expand...
Hi thanks for all the replies it was the slide pins on both top sides seized in never seen this before learning as I go grateful too all
 
Thanks for feeding back solution. It helps others if the title says something about the problem and also has 'Solved' in it when Solved. Title can be edited by person posting.
 
You must log in or register to reply here.

Similar threads

T
Complete newbie here
Replies
5
Views
690
brianp38dse
brianp38dse
A
Newbie Q’s - 1st Ever Series Land Rover
Replies
10
Views
1K
ANK84
A
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
651
miktdish
miktdish
A
2006 L322 4.2 SC - Bluetooth / MOST query
2
Replies
27
Views
2K
kds
K
B
P38A P38 2.5 dse engine noise?
8 9 10
Replies
184
Views
18K
Datatek
Datatek
Back
Top