Here's How ah done me side exit eggsauce.

MaxyMan · Jul 7, 2013

Ello all. Got bored of watchin tennis so just done a side exit on me wagon. This is a short write up how ah done it

1. Took the back box off and cut the section off that goes from mid pipe to the box (very short right angle section)

Cut ereee'

2. Fitted it up with new flexi pipe to make sure all fits. Then marked a hole on the back quater and drilled holes and then got jigsaw out finish the hole off

3. Fitted it all back together. Fixed mid box to back box angle pipe. Then fixed down clamps onto flexi pipe.

4. Finished it off with the old End tip off the back box. Wedged it through the hole in the pannel and around the flexi pipe and also clamped it on.

5. Jobs a gooden'

All am gana do now is get a metal yobo "no smoke no poke" surround ring off the bay *link* Land rover defender/discovery challenge offroad custom exhaust rings | eBay and pop her on then should tidy it up nicely.
Cheers.

Deasy · Jul 7, 2013

The guys at RAC parts are proper top blokes

MaxyMan · Jul 7, 2013

Deasy said:
The guys at RAC parts are proper top blokes

Good to hear. Not sure about them extreme wing corners though don't like look of em!

defender11069 · Jul 7, 2013

nice work mate...

currymunster · Jul 7, 2013

This is going to sound really innocent but please be kind.
What is the purpose of a side exit exhaust please?
Only one I can see is that maybe it doesn't get in the way when off road??

Sorry - Had to ask?

Pikey · Jul 7, 2013

It's so landy owners can be chavs too

MaxyMan · Jul 7, 2013

redhand said:
It's so landy owners can be chavs too

Yepp

Partly is becuase its out the way but mainly cos it sounds better! Some argue about helping engine breathe and mpg etc etc...

defender11069 · Jul 8, 2013

i done mine just to blast other peeps.ho and it sounds good.

cornish rattler · Feb 13, 2014

Mite do this to mine

MaxyMan · Feb 13, 2014

cornish rattler said:
Mite do this to mine

You should

Id cut the hole in the tub larger and create a mount to hold the flexi other wise you'll have to put up with the rattle it makes

defenderfatboy · Feb 13, 2014

MaxyMan said:
You should

Id cut the hole in the tub larger and create a mount to hold the flexi other wise you'll have to put up with the rattle it makes

who sells the flexi pipe and what size is it?

MaxyMan · Feb 13, 2014

http://bit.ly/1aHuGOP what I used..

adamkaye12 · Feb 14, 2014

MaxyMan said:
You should

Id cut the hole in the tub larger and create a mount to hold the flexi other wise you'll have to put up with the rattle it makes

how did you go about making the mount? i have been trying to work it out but can't quite get there!

lynall · Feb 14, 2014

The only good thing with side exit exhaust fitted with the 200tdi, is when you park next to some guy posing in the summer and start your car up cough cough!

MaxyMan · Feb 14, 2014

If ya ain't got a welder I can only suggest to put a clamp round the flexi, then use abit of plate drill two holes so you can attach it to the clamp and then bend it to to meet up with the old mount. Drill a 3rd hole on the lower part of the bent plate and use large bolt to join it back to rubber mount.

Quite difficult to explainss

defender11069 · Feb 14, 2014

Exhaust U Hose Clamp Clamps Clamping Clips Nuts Bolts Zinc Plated Universal | eBay

MaxyMan · Feb 14, 2014

defender11069 said:
Exhaust U Hose Clamp Clamps Clamping Clips Nuts Bolts Zinc Plated Universal | eBay

Yes put one them around it and bend abit of plate with a bolt in to go back through the rubberrrr mount

timtheenchanteruk · Feb 15, 2014

need to get round to mine, picked up a nice rolled chrome tip from the gutter yesterday

Paul D · Feb 15, 2014

timtheenchanteruk said:
need to get round to mine, picked up a nice rolled chrome tip from the gutter yesterday

LOL, reclamation at it's best .. ooh look, someone else's bit o'****e, wonder where that'll fit on me Landy ...

I do it all the time mate ..

adamkaye12 · Feb 17, 2014

defender11069 said:
Exhaust U Hose Clamp Clamps Clamping Clips Nuts Bolts Zinc Plated Universal | eBay

what size range did you go for?

Here's How ah done me side exit eggsauce.

Well-Known Member

Well-Known Member

Well-Known Member

AKA Mr cool...

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

AKA Mr cool...

Well-Known Member

Well-Known Member

Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

AKA Mr cool...

Well-Known Member

Well-Known Member

Old, nackered 'n broke, but the Landy is fine . :)

New Member

Similar threads